How to clean the ventilation fan
1. Gently unplug the power supply of the exhaust fan, be careful when unplugging the power supply, and do not unplug the power supply with wet hands.
2. Prepare a neutral cleaning agent and dilute it with a small amount of warm water. If there is oil stains, have hot water and dish soap ready.
3. Use a screwdriver to remove the screws on the outer surface of the exhaust fan, remove the casing, and then take off the exhaust fan blades and filter.
4. After removing the exhaust fan blades and filter, soak them in the prepared cleaning solution, and then use a brush to clean the fan blades and filter. If there is too much oil, wash it with hot water and detergent, or with alkaline water.
5. Dry the cleaned fan blades and filters, and place them in a ventilated place for later use.
6. Use a rag soaked in cleaning solution, then wipe the vents and other stained parts.
7. Put the dried fan blades and filter back on the exhaust fan, then fasten the casing and fasten the screws.
8. After the power-on test, the exhaust fan is light and the noise is low, which means that we have successfully cleaned the exhaust fan. If there are other problems, you should check the installation step by step for errors.
What to pay attention to when cleaning the ventilation fan
1. Pay attention to personal safety during the cleaning process of the ventilation fan, and be sure to turn off the power of the ventilation fan.
2. When cleaning, it is necessary to distinguish the severity. The cleaning action of the parts should be gentle and gentle, and do not press hard to prevent the parts of the exhaust fan from being deformed.
3. During the final installation, pay attention to the correct combination of parts and components, and do not install wrongly, leaving safety hazards.
4. The cleaning of the ventilation fan does not need to be so frequent, about once a month or two, which is not only conducive to the maintenance of the exhaust fan, but also can create a fresher bathroom environment.
Ventilation Fan Cleaning Tips
1. Detergent Decontamination
First on the stove Put the newspaper on the top, turn on the switch of the exhaust fan, after the ventilation fan works for a few minutes, spray the detergent on the fan of the range hood, turn off the exhaust fan, and leave it for 3 minutes. Then spray 60-degree hot water into the fan of the exhaust fan, and then turn on the switch to let the dissolved oil drip into the oil storage box.
2. Steam decontamination
Put half a pot of cold water in the pressure cooker, boil it, and when the steam is continuously discharged, remove the pressure limiting valve, Turn on the range hood to align the fan blades with the steam water column. Because the high-temperature water vapor continuously washes the fan blades, the oily sewage will flow into the waste oil box along the oil drain groove. This method has certain risks, do not try it lightly.
3. Glue removal
After drying the brushed fan blades, apply a layer of office glue before use, and use it for several months Then, tear off the oil stains on the fan blades in a block, and the oil stains will all stick to the glue. This method is convenient and clean.
Declare: The above methods are derived from the program system index or shared by netizens. They are for your reference only and do not represent the research views of this website. sex and authority.
