1. How to connect the camera to the computer
1. Turn on the camera. The connection can be successful only when the camera is turned on. Press and hold the camera’s switch until the screen lights up.
2. Connect the camera to the computer. Take the camera’s USB cable (included with your camera purchase) and plug the small end into the port on the camera.
3. Plug the other end into a free USB port on the computer. If your computer is a laptop, you need to plug the cable into the rear USB port and make sure it is in good contact. Since some cameras come with special cables, if you are not sure which cable to use, you will need to read the manual.
4. Transfer photos to check whether the contact is good. Open “My Computer” and among the available storage devices, you’ll see a camera icon. Open it.
5. Open the DCIM folder. In this folder, you can see all the photos. Transfer photos to a computer. If you want to transfer your photos to your computer, you just need to copy them all and paste them anywhere on your computer.
Second, how to solve the problem that the camera does not respond when connected to the computer
It may be the following Happening.
1. The data cable is broken, just replace the data cable.
2. The problem with the USB interface. If the computer is a desktop computer, try to insert the USB port on the back of the chassis.
3. It is possible that the relative driver is not installed properly. You can go to the official website of the camera brand to find the program and install it.
