What to do if the shredder is jammed
1. First, look at the structure of the shredder and check whether the shredder bucket is installed. If the shredder bucket is not installed properly, reinstall the shredder bucket and try again.
2. If the paper is still jammed after the machine is turned on, press the paper feed and paper eject function keys a few times to see if the machine can push the paper out by itself. When pushing, you can pull it out by hand to see if it can be pulled out.
3. If it is not possible, turn off the power of the machine, and then pour the machine head one by one, pour it a few times, shake it hard, and see if it can be poured out. If it can’t be poured out, you can use a thinner metal piece or screwdriver to sort out some stuck paper scraps, and then try to see if the machine can run.
4. If the above methods do not work, remove the paper box of the shredder, and you can see that there are stuck pieces of paper on the blade of the shredder, and gently brush with a small brush. , remove the shredded paper, and then turn on the power and try to run it. If the shredder still does not work, then only professional maintenance personnel can be overhauled.
How to repair common shredder failures
1. The shredder does not feed paper
First of all, let’s check whether the shredder has electricity, press the switch again, and see if the machine motor will rotate. If it rotates, it means that there may be a problem with the sensor head of the shredder, which has to be repaired by the manufacturer. If it doesn’t turn, check if it is jammed. If it is jammed, clean it up and it will be OK. There is another situation, that is, the overheating protection of the shredder. Due to the long-term use of the machine, the machine automatically enters the protection state, and the shredder will stop working and will not feed paper. At this time, we only need to let the machine rest for more than 30 minutes, and it can be solved.
2. No power
First check whether the power supply is plugged in or loose, then check whether the shredder switch is turned on, and then check Is the confetti tray closed? If the problem persists after reading these three situations, it may be that there is a problem with the electric board inside and must be returned to the manufacturer for repair.
3. The shredder has abnormal noise
First check whether the cutter is damaged, and then check whether there is too much shredded paper. Affect the normal work of the tool. Finally, check whether the belt is loose. There are belts in some old shredders. You can check whether the whole machine is oscillating with electricity.
4. The power indicator light is red
If the power indicator light is red, it means that the safety switch has failed. First check whether the safety switch or the protector plug is disconnected. Reconnect the plug if it comes off. Then check whether the voltage stabilizer and the integrated block feet are desoldered. If they are desoldered, they need to be re-soldered. If it still can’t be solved, the parts of the circuit board are damaged and need to be returned to the factory for repair.
Declare: The above methods are derived from the program system index or shared by netizens. They are for your reference only and do not represent the research views of this website. sex and authority.
