1. Installation steps of the buttons of the bibs
1. There are mainly gourd buttons and square buttons on the front of the bibs. First put the straps of the bibs into the holes of the square buttons , and then wear it out from below.
2. Thread the strap that passes through the square buckle into the gourd buckle, and then pass it through the hole in the middle of the gourd buckle.
3. Push back the part of the belt that has passed through the gourd buckle to make it parallel to the front belt, turn it over and do the following operations.
4. Pull out a part of the strap at the square buckle, leave a space, thread the strap at the end, and then pull it out from the opposite side, and straighten the strap left just now.
5. Don’t let the strap at the end show too much, so as not to affect the appearance, adjust the specific length of the strap yourself.
6. Connect the other half of the buttons in the same way. Fasten the buttons, and the overalls are connected. Hurry up and try it!
Second, how to fix if the button of the overalls is broken
The button of the overalls is broken, you can buy the same button and replace it, the button of the general overalls It is a combination of a gourd button and a square button. When buying bibs, there will be spare buttons, or buttons on other clothes that are not worn can also be replaced.
Some of the buttons of the overalls need to be installed by yourself, and some are already installed by the manufacturer. Under normal circumstances, you need to install it yourself. First, the square buckle is used. The square buckle is easier to install. First, put the strap of the overalls through the side of the square buckle, and separate it from the horizontal bar in the middle. Then put the gourd buckle on the strap to form the appearance of a hanging ring, and finally put the strap on the back of the square buckle to fix it, which means that it is installed.
