1. How to fold barbecue foil into a bowl
Tinfoil is often used when baking things in the oven, but some ingredients will leak water during baking, so It is necessary to fold the tin foil into a square box-shaped bowl and then place the ingredients. The tinfoil folded into a box can also be used directly as a bowl, which is very convenient. So how do you fold the tin foil into a bowl? The folding method of tinfoil is as follows:
1. Take out the tinfoil bought in the supermarket, and cut out the appropriate length according to the size of the required box.
2. Fold the tin foil on both sides of the wide side inward to leave a folded imprint, and then fold the two sides of the long side inward to leave imprints.
3. Open the tin foil folded on four sides, pinch out a beveled corner at the right angle of the wide and long sides, then fold the beveled corner into the wide side, and fold the other three corners in turn Well, a BBQ foil bowl is done.
The tin foil can be folded into a larger bowl, which can prevent the ingredients from propping up the box. In addition, note that the tin foil is relatively thin, so be careful when handling it, and do not tear the bowl with too much force.
Second, how to fold ingots from tin foil paper
In the past, tin foil paper was mostly used to make coins, and tin foil paper was often folded into shapes such as ingots, gold bars, and lotuses. , among which ingot is the most common style. Every Qingming, Zhongyuan Festival or the death anniversary of the deceased, many folks burn paper ingots to pay homage to their deceased relatives, which represents the family’s memory of their relatives and hope that they can The desire to live well in another world. People believe that after burning these ingots, the dead ancestors can receive them to pay homage to their ancestors and express their grief. So how do you fold ingots from tinfoil? The folding method of tin foil is as follows:
1. Prepare a piece of tin foil paper with a length-to-width ratio of 3:2, which will look better when folded.
2. Fold the tin foil paper in half along the long side, fold the folded side up about a third, and then fold the folded half in half to make it a folded line.
3. Fold it in half to get a square, and then fold the square up one corner.
4. Fold the other corner in this way to get an isosceles trapezoid.
5. Hold the two corners with both hands, blow air from the bottom to the top with the mouth, inflate the inside of the trapezoid, and get the shape of the ingot, so the tin foil ingot is made.
