Curtain rod installation method
1. Determine the installation position of the curtain rod
The installation position of the curtain rod includes the installation width and height. The width can be determined by the width of the window, which is 20-30 cm more than the width of the window on both sides. The installation height is divided into open rod and dark rod. The installation height of the open rod is in the middle of the ceiling to the top of the curtain, and the dark rod is at the top position in the curtain box, or is installed at any part of the curtain box.
2. Positioning and punching
Considering the firmness of the fixing, in order to avoid the distance between the fixing parts being too large and unable to bear the tension, the fixing hole distance must be calculated first. Generally, the distance between the fixing parts is less than or equal to 50cm, and then the line drawing and positioning operation is performed. After the installation and fixing position is determined, drilling operations are required to fill in the expansion screws. If it is a wooden base, there is no need to drill holes, just use self-tapping screws to fix it.
3. Installation of curtain rods
For Roman rods, after positioning and punching, you can fix the mounting bracket first. The rod can then be placed on the mounting bracket.
Installation method of curtain track
1. Height of curtain track: Before installing curtain track, first measure the height of the installation. Curtains are divided into single, double or triple rails. When the width of the window is greater than 1200mm, the curtain rails should be disconnected, and the simmering bends at the disconnection should be staggered. The track is generally installed first for the bright curtain box, the machine screw should be added to the heavy curtain track, and the track should be installed after the dark curtain box. The small corners of the heavy curtain track should be densely spaced, and the size of the wood screws should be ≥30mm.
2. Curtain track hoisting: To install the hoisting clip, after rotating the clip 90° to connect with the track, use self-tapping screws to install the hoisting clip on the top plate. If the curtain track is a concrete structure, expansion screws are required.
3. Curtain track fixing: After the curtain track is connected and fixed, install the rod or wire, and pull it on the fixing piece to reach the standard of being flat and consistent with the room elevation. Install standard curtain track (double track), the basic width of the curtain track is usually more than 15cm, and the single track can be reduced according to the actual situation.
4. Curtain track adjustment: It is also necessary to adjust the position of the curtain track. Floor-to-ceiling curtains or curtains that hang over the countertop should allow the width of the window sill when installing the curtain track to avoid being blocked when the curtain sags. Elegant. Therefore, it is necessary to adjust the installation position of the curtain track.
5. In addition, the curtain track installation should pay attention to the solid wall, which cannot be hollow, otherwise the veneer will easily burst when drilling. If the curtain track is installed and fixed to the wall, it is necessary to punch the hole with an impact drill and plug it with wood, and then fix the track to the wood.
Hanging method of curtains
1. Sleeve type: the hasp hook is connected to the edge of the curtain and to the hanging ring above, because it only needs to be hooked on the curtain The edge is sufficient, so it can be used to hang almost any type of curtain.
2. Knotting style: directly tie the curtains with a bow on the rod. This curtain hanging method can increase the beauty and is very romantic and warm. Set of rod type: The curtain can be set along the curtain rod, and it is easy to disassemble and assemble, reflecting a more casual and free atmosphere.
3. Suspension type: a set of plastic hanging lines are sewn on the back of the curtain to hook the buckle, the appearance looks beautiful, the opening and closing are smooth, and the hardware is hidden, which is very suitable for hanging heavy-weight flannel curtains .
4. Hidden buckle type: Friends who don’t like to expose the hardware can try this hanging method. The installation is very simple, the appearance is neat and clean, and the curtain looks like it is suspended in front of the curtain rod.
Precautions for curtain installation
1. When installing curtains, it is necessary to pay attention to the fact that curtains are equipped with many hardware accessories, such as curtains, screen curtains, windows Rails, etc., these are important accessories for curtains, and they are indispensable.
2. Many owners will install the wallpaper first and then install the track, so the wallpaper is easy to be dirty when installing the track, and it will be difficult to repair after punching the wrong hole, so the track should be installed first and then the wallpaper. In this way, the wrong holes can be covered up by the wallpaper and will not affect the appearance.
3. If the curtains installed at home are installed in the inner frame, then the mosquito screen must be installed. We can reserve the position for installing the mosquito screen when installing the track, which will not affect the installation of the mosquito screen in the future.
4. It is recommended to install the curtain track with a solid aluminum alloy track, which is durable and hard. However, the price will indeed be relatively high. If you choose cheap rails, the curtains will often fall off, and it will be very troublesome to maintain them frequently. A durable and hard track is recommended.
