How to install the hard disk player How to install the hard disk player for the first time
The hard disk player can store massive video files, fully compatible with network RM/RMVB streaming media movies, and at the same time It also saves more than 10 times of power than the computer host. It has the convenient remote control management and playback function of DVD. It can be connected to high-definition TVs and projectors. And it quickly became popular and entered thousands of households. When you have such a machine, first of all congratulations, but hard disk players are also fashionable products. I believe that many people are exposed to hard disk players for the first time. This article: Starting a wonderful show… The first installation method of the hard disk player:
The first step: install the hard disk
Remove the covers one by one to expose the motherboard (Decoder board) Use your thumb to push the VGA head, you can take out the mainboard of the player, without pulling hard, connect the hard disk to the mainboard, and the installation is complete.
Step 2: Connect to the computer
Use the USB cable that comes with the hard disk player to connect the player to the USB2.0 of the computer motherboard; (not It needs to be connected to the power supply. Of course, connecting the power supply will not damage the player. Some people are worried about the damage. In fact, it does not matter.
Reminder: generally do not insert the USB hole on the front panel of the computer case, for fear of causing insufficient USB power supply; the power supply and transmission speed of the front panel of most computer hosts are not as good as the rear panel of the computer.
Step 3: Install the computer to recognize the hard disk
After the computer finds the hard disk, right-click “My Computer” on the computer desktop → Manage → Disk Management →Then find the hard disk dialog box, click “Next” to complete; at this time, the RM hard disk player becomes a mobile hard disk box.
Step 3: Initialize the hard disk
Select a new unpartitioned hard disk, right-click: Create a new disk partition → Next → select “Primary Disk Partition” ) Do not divide it into “logical partition”, → enter the partition capacity, enter below 32G (if it exceeds 32G, then only NTFS format is optional), select “Quick Format” → the next step is completed, and the rest of the unpartitioned is the same. After it is divided, after the partition is completed, copy the video and audio files to the hard disk.
Important note: 2.5 inches, if each partition is larger than 30G, then use “PQMAGIC Partition Magician” to partition and format, for example: if there is a 120G hard disk, one is required to distinguish 20G and the other to distinguish 100G If so, use this method to solve it.
When partitioning, select “Main Disk Partition” to support 4 main disk partitions; if you want to divide it into “Logical Partition”, first divide it into an extended partition, and then use the extended partition as a logical partition! It supports up to 6 partitions. The 3.5-inch hard disk player advocates using “PQMAGIC Partition Magician” to partition and format. When connecting a 3.5-inch USB partition, it needs to be connected to the power supply; in order to make it easier to identify the USB interface, first turn on the power supply, and then connect the USB connection. Wire.
Step 4: Connect the monitor (TV)
Connect the TV with AV or connect the monitor with VGA, that is, start playing. The factory default is in VGA state, and it may also be in AV state. If it doesn’t display, then use “VGA/AV” on the remote control to switch. At this time, it may be in the process of reading the disc or already playing, and it needs to be switched several times. Until the normal image appears, now officially start your film and television feast.
