1. How to install the Shanghai Red Heart Garment Steamer
1. Place the Shanghai Red Heart Garment Steamer on a smooth ground.
2. Insert the pole into the hole in the middle.
3. Rotate the upper screw to fix it.
4. Lift the handle of the water tank and place it at the back of the fuselage with a larger space.
5. Find the nozzle line connection, and align the line with the jet outlet of the fuselage.
6. Rotate into place and make sure the connection is correct.
7. After the installation of the red heart ironing machine is completed, connect the power supply and turn on the switch.
8. After waiting for 1 to 3 minutes, the nozzle will be able to spray high-temperature steam, and then the clothes can be ironed.
Second, precautions for the use of the red heart garment ironer
1. Try not to be short of water, although there are internal temperature control and other protective measures, it should be avoided Dry roasting. Be sure to unplug the power cord when not in use to prevent danger. If the handle is broken or the sprinkler is leaking, replace it at any time. Do not touch the steam nozzle before cooling to avoid burns.
2. Use a high-power garment ironer for thick clothes, and use a low power for light and thin clothes such as silk. When ironing clothes, it is best to be close to the clothes and slow down.
3. When ironing the trousers, you can use a spray clip. If not, you can put the trousers on a flat surface and use a smooth metal nozzle instead of a flat iron to achieve a flat ironing effect.
4. The steam temperature is high, so you need to be careful not to be scalded, and keep away from children when using it.
5. After use, drain the water, because the residual water is easy to produce scale, thus shortening the service life of the red heart garment steamer. After the clothes are ironed, properly pull them with your hands to disinfect and remove odors.
6. In terms of maintenance, if the steam output becomes smaller after a period of use, it is due to the accumulation of scale inside the fuselage. It must be mixed with white vinegar and water at 1:1, and then poured from the water inlet. Put it in, shake it repeatedly, open the descaling valve at the bottom of the machine, let it go, and rinse it with clean water several times. Shanghai Red Heart Garment Steamer Brand Products >>
