How to maintain or restore the anti-fogging effect of the new swimming goggles
? It is an anti-fog coating, do not wipe it off with your hands or other things, otherwise the anti-fog effect will not be good. Please soak the goggles with water before wearing them.
To maintain or restore the anti-fog effect, the correct use is as follows:
1. The anti-fog function is hydrophilic. The fog effect is better.
2. During wearing, cleaning or use, avoid touching and smearing the anti-fog surface of the lens with your fingernails or fingers to prevent the lens from scratching and destroying the anti-fog effect.
3. After each swim, please rinse with water to avoid the grease covering and drying out and blocking the anti-fog effect.
4. After each swim, the anti-fog function of the mirror surface will be affected due to personal sweat and grease in the swimming pool water will adhere to the mirror. At this time, neutral detergent can be added with water to gently rub the foam with your fingers, and then use your fingers to take a little foam and wipe the goggles to clean the greasy dirt (note: before wiping with foam, the lenses should be soaked in water first; When wiping with your fingers, avoid scratching the anti-fog film with your fingernails.); After rinsing with water, the greasy dirt can be removed and the anti-fog effect can be restored.
5. Because the anti-fog in the goggles has been used and cleaned for a long time, the anti-fog effect in the goggles will be reduced. To enhance the anti-fog effect; it can also be applied to the mirror surface of swimming goggles with saliva (no need to rinse with water), but these methods can only temporarily prevent fog, and cannot maintain the anti-fog function for a long time, but can prolong the use time of swimming goggles, but Before each use, check whether the mirror surface is greasy and clean with normal neutral detergent foam.