How to maintain a raincoat
1. Tape raincoat
If your raincoat is a tape raincoat, then immediately after use, you should put the used clothing in a cool and ventilated place to dry the raincoat. If there is dirt on your raincoat, you can put your raincoat on a flat table and gently scrub with a soft brush dipped in some water to wash off the dirt on it, remember the tape raincoat It can’t be rubbed by hand, let alone exposed to the sun, nor can it be burned on fire, and it can’t be washed with soaps that are relatively alkaline. The purpose of this is to avoid the aging of the raincoat. Or crispy.
Adhesive raincoats cannot be put together with oil, and they should be stacked well when they are stored. Heavy items cannot be placed on the raincoat, and it cannot be placed in a relatively hot environment. Keep the things together to avoid wrinkles or cracks on the raincoat. In the box where you put the tape raincoat, you should put some mothballs in order to prevent the raincoat from getting sticky.
2. Rainproof cloth raincoat
If your raincoat is a rainproof cloth raincoat, when the raincoat is exposed to the rain When wet, you can’t bounce the rain on the raincoat with your hands or a fur hat, as doing so may damage the waterproof properties of the fibers in the raincoat.
Raincoats are not suitable for frequent laundering. If you wash it frequently, it is very likely that the waterproof performance of the raincoat will be reduced. If you think your raincoat is really dirty, you can rub the raincoat lightly with some water, then dry the washed raincoat and hang it to dry. When the raincoat is completely dry, take the iron Just heat it up. If you are going to put away the raincoat, one of you must let the clothes dry completely before folding it. This is to prevent the waxy substances in the raincoat from chemically reacting due to moisture, thereby making the raincoat moldy.
3. Plastic film raincoat
If your raincoat is a plastic film raincoat, when the raincoat is exposed to rain When wet, you should wipe the water off the raincoat immediately with a dry rag, or take the raincoat to a cool, dry place and dry it.
Plastic film raincoats cannot be exposed to the sun, let alone baked on fire. If your raincoat is wrinkled and cannot be ironed with an iron, you can soak the raincoat in warm water of 70 to 80 degrees for a minute, then take it out, put it on a flat table, and use your Spread the raincoat flat with your hands, and don??t try to pull the raincoat hard to avoid the raincoat being deformed. If the plastic raincoat is used for a long time, it is easy to degumming or break. If the hole on the raincoat is not too big, then You can choose to tinker with it yourself.
The repair method is: put a small piece of film where the raincoat is torn, and then put a piece of cellophane on top of the film. Then use an electric iron to quickly iron it so that the film can stick to the torn opening to complete the purpose of repairing. When repairing raincoats, be sure to remember one thing: raincoats cannot be sewn with needles and threads. Otherwise, it is very likely that the raincoat will have bigger problems.
Raincoat maintenance and maintenance tips
1. Storage method of rubber raincoats
When collecting rubber raincoats, you can lined the newspaper in the interlayer, or sprinkled with A layer of prickly heat powder is folded again, so that it will not stick after being stored for a long time.
2. Rubber raincoat odor removal method
When the rubber raincoat has a peculiar smell, hydrogen peroxide can be mixed with water to soak the raincoat, and the odor will disappear after drying. disappear.
3. Plastic raincoat sticking method
If the plastic raincoat is broken, you can align the break first, put a piece of cellophane on it, and then use a hot Press the iron bar on it a few times, and the time of each pressing should not be too long, so that the cellophane will not be scalded, and the plastic below will be glued. For holes, you can use the same plastic cloth to cut into squares or circles slightly larger than the holes, cover the holes, then cover with cellophane, and use the same method to heat and glue them.
4. Plastic raincoat wrinkle removal method
If there is a slight wrinkle on the raincoat, you can hang it on a hanger and let it restore itself naturally. If the wrinkles are tight, soak the raincoat in hot water at about 70??C for 2 minutes, take it out and put it on a flat plate to flatten it, and then wipe off the water marks to restore it to a flat surface. Be careful not to pull it hard.
Declare: The above content comes from the program system index or shared by netizens, and is for your reference only. It does not represent the research views of this website. Please pay attention to the authenticity and authority of the content source. sex.