How to maintain spotlights
1. Correct installation is the premise
Correct installation of lamps is the extension of lamps Prerequisites for service life. If it is not installed correctly, the lamps will be easily broken, and sometimes even explode, which is very dangerous. In the home, special care should be taken in the installation of bathroom and kitchen lamps.
The lamp in the bathroom must be equipped with a moisture-proof lampshade, otherwise the service life of the lamp will be greatly shortened; the kitchen lamp should pay special attention to preventing oil fume, because the accumulation of grease will affect the illumination of the lamp; and choose a light-colored lampshade The light transmittance is good, but it is easy to stick to dust. It should be wiped diligently so as not to affect the penetration of the light; and generally speaking, do not place the lamps and lanterns of the kitchen and bathroom in the position where the water vapor is easy to condense, so as to avoid bursting.
2. Replace the aging lamp in time according to the light source parameters provided by the logo. , When it is found that the two ends of the lamp tube are red, the lamp tube is black or has shadows, and the lamp tube does not turn on, the lamp tube should be replaced in time to prevent unsafe phenomena such as ballast burnout.
3. Do not change the structure of the lamps
During cleaning and maintenance, care should be taken not to change the structure of the lamps, and do not change the parts of the lamps. After the maintenance, the lamps and lanterns should be installed as they are, without missing or wrong installation of lamp parts.
4. Do not switch on and off frequently
Try not to switch on and off frequently when using lamps, because the current through the filament is greater than The current during normal operation makes the temperature of the filament rise sharply and accelerate the sublimation, which will greatly reduce its service life, so it is necessary to minimize the switching of lamps.
5. Moisture-proof
The most important thing for the maintenance of lamps is to prevent moisture. Moisture can easily cause lamps and lanterns to rust, fall off paint, and shorten the lamps and lanterns. Therefore, moisture-proof is the key to lighting maintenance, especially for bathroom, bathroom and kitchen lighting, it is best to install moisture-proof lampshade to prevent moisture intrusion and avoid damage or leakage caused by rust.
During the maintenance of lamps, we must pay attention to safety. Some people like to use water to clean lamps. Remember, don’t, if there is any residual moisture in lamps, it may cause short-circuit damage to lamps, and even more serious explosions may occur. , Crisis our life monitoring, so we must not clear the water area, just wipe it with a dry rag or paper towel.
6. The cleaning method should be correct
After the lamps are used for a period of time, a thick layer of ash will be deposited on them, which will affect our vision, so Regular cleaning is unavoidable, so be careful not to change the structure of the lamp during the cleaning process, and do not replace the parts of the lamp casually. After the cleaning and maintenance are completed, the lamp should be installed as it is, and do not miss or wrongly install the lamp parts.
