Dimensions and specifications of wine racks
There are many types of wine racks, and the specific sizes are different, but the specifications of red wine bottles are relatively simple, and the diameter of the bottom of the bottle is generally 8cm and 9cm Two types, 30cm high, are general-purpose wine racks. The red wine shelf is mainly to store the red wine upside down. The conventional size and length should not exceed 1.2m and the height should not exceed 2.4m, and it needs to be divided into upper and lower layers. is 50cm.
1. Stainless steel wine rack size: 230*140*385mm, this kind of glossy and exquisite wine rack can place wine bottles at will. It is practical and beautiful, and has an artistic feeling.
2. The size of the wrought iron solid wood wine rack: 415*235*510mm. In addition to this standard size, it can also be customized. The wrought iron wine rack can display the appearance of red wine to the greatest extent.
3. The creative wooden wine rack size: 410*330*20mm, mainly made of pine wood, such a wine rack has a pine fragrance and lifelike texture.
How to do a wine rack
Tools:
Ruler, utility knife, scissors, awl , marker, glue, tape.
Materials:
Cardboard with a certain thickness (length not less than 3m, width not less than 30cm), string.
Method:
The first step: cutting the cardboard
1. First, prepare To make the cardboard for each component of the wine rack, you need to cut a total of 5 parts of different sizes:
1 piece of cardboard for the outer frame: 100×30cm
3 pieces to make Cardboard for storage compartment: 50×30cm
1 cardboard for bottom support: 45×30cm
2. The width of each part of the cardboard is unified to 30cm, which is the vertical depth of the wine rack , Because the height of the general red wine bottle is about 30cm, if you want the bottle to extend slightly out of the wine rack, you can change the 30cm to 25cm.
3. Then mark the size of the folded part of each part of the cardboard according to the marked size. The cardboard used for the outer frame and the storage compartment should leave a 5cm adhesive seam respectively. Then, lightly score the cardboard with a ruler or utility knife, leaving nicks for easy folding.
Step 2: Make storage compartments
Fold the 3 cardboards for storage compartments into equilateral triangles according to the crease, and use glue and tape Do double fixation. In order for the 3 storage compartments to be fastened together as in the finished picture, we will use a string to connect them in series.
The specific method is: take the corner with the seam as the top corner, and drill 3 holes in the left, middle, and right positions of the side where the top corner is located (note that each storage compartment must be drilled, and the corresponding The holes in the position should be on the same line); then thread the rope through it and tie a knot at both ends.
Step 3: Make the Outer Frame
Now it’s time to work on the outer frame and bottom bracket. Take 100×30cm cardboard and divide it into three equal lengths, fold it into a large equilateral triangle, leave 5cm on each side, and cut off the rest, so that you get a triangle with only 2 sides . Secure the triangles with glue and tape, and glue the bottom support board underneath.
Step 4: Assemble the wine rack
If you put the three storage compartments directly into the outer frame, it cannot be fixed, so you have to use wire The rope will fix the storage compartment to the outer frame again. Drill holes in the junction of the storage compartment and the outer frame, and tighten the cord. It is best to tie the cord. The simple wine rack will become very strong.
