1. DIY method of making floor mats with old cloths
Materials: several pieces of old clothes, scissors, rulers, cardboard, chalk, pencils.
Steps:
1. Cut cardboard and fabric. Cut out the size cardboard you need to make the floor mat according to the actual needs, and cut two square cardboards, one large and one small, the size can be determined by yourself. Put the cut cardboard on the cloth and paint it with chalk, then the cloth can be cut. For the square fabric, it is better to use summer clothes that are thinner. It is easier to do this.
2. Cut the sleeves and hem edges of the clothes first, then cut them at the side seams and flatten them to find the right size. Need to splice. The size of the floor mat should be 2 pieces, and the fabric can be thicker.
3. Fold the triangle. Fold all the squares that have been cut, and fold them on the opposite corners, leaving a seam to cut. Do not throw away the scraps of cloth that you cut out, as they can be used as padding for sofa cushions or seat cushions.
4. Lay the triangles on one side of the floor mat, and stack the triangles one by one on the car from the outside to the inside. Leave a seam on the outermost circle.
5. Change to a smaller triangle when you turn to the inner position.
6. It is easy to see that one side of the triangle is not pressed at the corner. When the triangle is finally finished, check it and nail it with a needle.
7. Cover the innermost seam for decoration.
8. The closer to the middle, the thicker it is, and some cars cannot be pressed, so in order to keep the thickness consistent, two pieces of oval cloth are used to sew together, and cut out before plugging in. The cloth is shredded flat and pinned to it under the flower decoration.
Second, how to make carpets from waste yarns
Method 1:
1. First in a piece Nails are nailed around the larger board. If there are other methods to fix it, it is also possible. The spacing of the nails should be the same, and then wrap the white wool.
2. After winding the white yarn for a few times, you can replace it with pink yarn. After nailing the nails, wrap the old yarn around the nails.
3. Wind a few laps of pink yarn on top of the white yarn, and make a few more laps, so that the yarn ball will be full, and then use the pink yarn to firmly connect the pink and white yarns at the intersection of the yarns. The yarn is fastened.
4. Next, you can cut the pink yarn with scissors. When the thickness is about the same, at the intersection of each section of yarn.
5. In this way, all the pink yarns are cut, but because of the fixed white yarns below, it becomes a carpet of yarn balls, which can be trimmed with scissors.
6. Cut off the wool on the sides that is fixed to the nails, we have a very cute wool ball rug, when all the communication points are tied, cut off their middle points.
Method 2:
1. Prepare unnecessary old wool, wooden boards, nails and other tools. These things need to be cleaned in advance.
2. Then use four wooden boards of the same size to make a braided frame. Twenty-two nails need to be nailed down on each wooden board according to a square route. Then use your favorite yarn to keep thickening back and forth, each one should be symmetrical, if it is a thin yarn, you need 50 strands.
3. The color line of the second layer is the same as the first layer, and the third layer is random, it will be pressed underground and generally invisible, but the line of the fourth layer should be the same as the third layer. Same.
4. After fixing the sweater needle first, wrap the thread on it, start tying the thread from the opposite corner, go in from the front hole, and then come out from the back hole. This is a completed process, and the rest The steps are the same as it is, when it is done, cut off the four sides without using scissors.
5. The self-made carpet has been made, you need to check whether there is any problem first, if not, soak it in boiling water, then clean it, and put it in a sunny place to dry.
