How to make an outdoor folding table
The outdoor folding table is light and portable, which is very suitable for outdoor activities. Now there are many outdoor folding tables to buy online. If you have strong hands-on ability, you can also make your own. Make an outdoor folding table. Here are some ways to make outdoor folding tables:
Practice 1
1. Prepare materials and tools: wooden boards, electric drills, saws , tape measure, living hinge, nylon rope, right angle, hammer, nails.
2. Position the cut wood planks with the help of a right angler. Use nails to form a right-angle arch bracket, and insert a beam plate at the middle height of the two legs of the bracket.
3. Make four wooden shelves, screw the screws, and connect the shelf brackets through loose-leaf.
4. Drill a hole in the middle of the beam plate, thread the nylon rope and tie the ends of the rope into knots.
5. The completed pair of shelf table brackets can also be folded in half when not in use. When they are used, they can be opened and placed on top of a wooden board, which is a simple folding table.
Practice 2
1. First make the small shelf at the back, and fix the shelf with woodworking glued wood screws.
2. Make the table top and the table legs on both sides. Pay attention to the hollowing and cutting style of the table legs.
3. Use long hinges to fix the table legs and the side panels of the shelf, and test whether they can be retracted freely.
4. Finally, connect the desktop and the shelf beam with a long hinge (the reason why the side panel hinge is installed first and then the desktop is installed is to allow the desktop to wrap the table legs).
Practice three
1. Saw wood: 4 table legs, 4 table support rods, 4 short fixed rods, 2 long The fixed rod of the point (the length is two table legs thicker than the shorter one).
2, 4 table legs are drilled at their intersections according to the height of the table you need, and the positions of the 4 holes should be the same.
3. Drill holes at the connection between the table legs and the table support rods. The drill bit size is a little bigger than the bolt.
4. Begin to assemble the table frame, first nail the inner table legs with short fixing rods and iron nails, then nail the outer table legs and attach the bolts.
5. When screwing on the bolts, you will find that the bolt heads are protruding from the table legs and the support rods, and the table legs cannot be merged. Head down.
6. After installing the table frame, you will see that the top of the table leg protrudes from the plane of the support rod, so you need to saw off the excess part, or you can’t install the table top.
7. Finally, fix the table top to the table frame with wood screws to complete.
Practice four
1. Prepare materials and tools: wooden boards, hammers, planers, and paint-free ecological boards are used for the desktop.
2. Seal the edge of the desktop, glue it well, tap lightly, and press it tightly.
3. Scribe, plan, and drill the wooden strips, then draw the lines, saw the position of the falcon head, and punch the holes.
4. Apply glue, then stick them together and fix them with wedges.
5. The table legs and two window braces can play a fixed role. One end of the table legs is connected to the desktop with a hinge.
6. Add a wooden strip under the table to ensure that the table will not collapse when the window brace is not tightened.
7. Finally, two coats of varnish were applied to the legs of the table to facilitate future cleaning, and a simple outdoor folding table was completed.