I. Introduction to jade engraving machine
As the name suggests, jade engraving machine is a machine for carving jade articles. It is widely used in jade, signs, molds and other industries. The materials that can be processed include Jade, handicrafts, wood, marble, granite, as well as artificial stone, sandstone and other materials.
Second, how to operate the jade carving machine
1. Make sure that all machine tools are connected to the computer before the jade carving machine is turned on, and then turn on the power of the machine and the computer, Enter the operating system after the system starts.
2. Determine the origin of the workpiece, manually move the x and y directions of the jade carving machine to the desired origin position on the workpiece, and select the “Set current point as the origin of the workpiece” menu, or put the The coordinate value of the current position is reset to zero, so that the processing process uses the current position as the starting point for executing the processing program.
3. Before processing, the user usually loads the required processing program, otherwise, some functions related to automatic processing are invalid. Select the Open(f)|Open(o)… menu. The window standard file operations dialog will pop up, where you can select the drive, path and file name to open the file. After clicking the “Open” button, the jade carving machine processor loads the system.
4. After the control system is turned on, select the menu of “Back to Mechanical Origin”. The machine tool will automatically return to the machine origin, and the system coordinates will be corrected. In some cases, such as after the last graceful shutdown, restart and continue the previous operation. The user does not have to perform a mechanical reset. The operating system will save the current coordinate information when it exits normally. Also, if the user confirms that the current location is correct, the action cannot be performed.
It can be seen from the above that the correct operation method of the jade engraving machine can use the equipment to engrave more exquisite workpieces, and can also prolong the service life of the equipment and save electricity costs.
Three, how to maintain the jade engraving machine
The spindle of the jade engraving machine is mainly divided into an air-cooled spindle and a water-cooled spindle. Due to the factors of the working environment, the spindle is the equipment accessory with the largest contact with the workpiece and waste, and the performance of the spindle also greatly affects the quality of the engraved finished product. Therefore, in the daily production and processing, we must do a good job in the maintenance and maintenance of the jade engraving machine.
1. Use a vacuum cleaner to clean up the waste on the rotor end of the spindle motor and the motor terminals after working every day to prevent the waste from accumulating on the rotor end and the terminals, so as to prevent the waste from entering the bearing , accelerate the wear of high-speed bearings; avoid waste chips entering the terminal, causing the motor to be short-circuited and burned.
2. When installing the card and changing the tool, the pressure cap must be unscrewed. The method of directly inserting and pulling the tool cannot be used to change the tool. In case of a jam, do not forcefully pull it out. . The end of the spindle and the front end cover must not be hit, otherwise it will destroy the precision of the fine bearing and the spindle, resulting in the loss of the precision of the spindle reversal and rotation.
3. After unloading the tool, clean the chuck and the pressure cap Clean and prevent debris from adhering to it. The placement of the tool must ensure the accuracy of reverse rotation, otherwise it will cause severe vibration, affecting the engraving quality and bearing life.
4. Be sure to clean up the tool, chuck and pressure cap when applying the knife, and carefully check whether there is any foreign matter attached to the connection. After assembly, check the runout of the tool root < 0.015MM. If it exceeds the tolerance, it should be corrected by repeatedly loosening and tightening and adjusting and changing the contact surface of the tool handle. If there is no improvement, check whether each contact surface is in a normal state.
5. After starting the machine, it is necessary to check the working status of the cooling water flow of the motor water tank, check whether the water pump is working normally, check whether the cooling water is polluted by scale and microorganisms, and check whether the pipeline status is normal. Ensure the normal circulation of cooling water, and clean the inner wall of the water tank frequently. It is strictly forbidden to turn on the spindle motor without cooling water passing through it.
6. Use the spindle motor strictly in accordance with the factory manual of the jade engraving machine. When the spindle fails, do not disassemble it at will, and contact the manufacturer in time for maintenance and troubleshooting.
Declare: The above methods are derived from the program system index or shared by netizens. They are for your reference only and do not represent the research views of this website. sex and authority.
