1. How to start the hedge trimmer
As a garden machine, many friends don’t know how to use it, mainly because they don’t know how to start it. The starting method of the machine is not difficult, it is divided into six steps:
1. Turn on the flameout switch.
2. Pull out the choke (close).
3. Press the oil bubble 5-8 times to ensure that the oil bubble is full of oil.
4. Slowly pull out the start rope, and then pull it out after you feel resistance.
5. Push the choke valve (open) after hearing the sound of cylinder detonation.
6. Pull the start rope several times again to start the machine.
2. Reasons and solutions for the difficulty in starting the hedge trimmer
The hedge trimmer is often used in garden work. In the process of using the hedge trimmer, Sometimes there is a problem that the hedge trimmer cannot be started or is difficult to start, so what is going on? How to solve this problem? In fact, there are many reasons why the hedge trimmer cannot start, usually caused by blockage of the oil circuit or circuit failure. The specific solutions are:
1. Blockage of the oil circuit
(1) First check the spark plug, remove the spark plug and place the top on the metal, and pull the machine to see if the spark plug has electricity. It may be caused by the contamination of the spark plug. Clean it or repair it.
(2) Check the air filter, remove the air filter, and check whether the air filter is clean by the way. The air filter removes dust every 25 hours, and the dust should be more frequent.
(3) Check the carburetor, remove the carburetor, drip some oil into the cylinder, and then start the machine. If it still doesn’t start, it means that the carburetor needs to be cleaned or replaced.
(4) Check the cylinder body, if the above methods can not solve the problem, it may be a problem with the cylinder body, which is a major fault and needs professional maintenance.
The gasoline hedge trimmer cannot be started or is difficult to start, which usually occurs when the hedge trimmer is not used for a long time, and the oil circuit or circuit is blocked when it is suddenly used. , to pour out the oil in the fuel tank, then start the machine, and burn out the oil in the carburetor and cylinder, so as not to block the carburetor with residual oil.
2. Circuit failure
If it is an electric hedge trimmer, if there is a problem with the circuit, it may also cause it to fail to start. The inverter is faulty, the circuit is short-circuited, etc., it needs to be checked one by one.
