How to use different types of financial binding machines
1. Manual binding machine: use the working methods of handle pressing down and punching, automatic pipe cutting, manual perforation, and manual riveting .
2. Semi-automatic binding machine: It adopts the working methods of motor drilling, automatic pipe cutting, manual perforation, and manual riveting.
3. Electric binding machine: It adopts the working methods of motor drilling, automatic pipe cutting, manual perforation, and manual riveting.
4. Automatic binding machine: One-click punching and pipe cutting, manual punching, and automatic riveting.
5. Fully automatic binding machine: all steps such as punching, cutting, threading, and riveting can be completed with one click.
Operation steps of electric financial binding machine
1. Turn on the power, press the [Power Switch] button to the “I” position, the red indicator light of the power is on rise.
2. Check the punching position and press the [Down] key. When the drill moves down to the top of the document to be bound, release the key and confirm whether the binding position is appropriate. Press the [Reset] key to make the drill bit. reset.
3. Set the size of the binding hole from the border of the document. First, specify the required distance (range 3-20mm), then open the worktable locking pin and move the worktable back and forth to the required distance. Once in position, lock the table with the table lock pin.
4. Press the [Start] button, the drill will rotate and automatically descend to drill. After the drilling is completed, the drill will automatically rise back to its original position, and the pipe cutting mechanism will cut a suitable length of hose, and drop into the slot of the nozzle box.
5. Take out the rubber tube that has been cut in the take-over slot. When the [preheating] indicator light is on, pass the rubber tube through the hole of the ticket and move it to the top of the lower hot riveting head. Slowly press down the binding handle, let the hot riveting needle pass through the hose and confirm that it has entered the needle hole of the lower hot riveting head, and then press the binding handle firmly, after about 5-10 seconds, release the binding handle and take out the bound document. The binding work is completed.
What should be paid attention to when using the financial binding machine
1. For the financial binding machine, it is necessary to pay attention to the clean and tidy body, and place it in a dry place. Remember not to expose it to the sun. When in use, it should be placed in a firm and flat place, such as a desktop, etc.
2. The financial binding machine should be below the specified range during operation, such as the maximum number of punched pages; transparent sheets and cover papers Do not exceed the specified number, otherwise it will easily cause damage to the machine.
3. For the power supply and power, the rated voltage and rated power should be provided; the power supply and the model should be matched, and the power cord should be cut off in time after use to avoid damage to the financial binding machine due to the power supply; In addition, in thunderstorm weather, try not to use the financial binding machine; some damage caused by abnormal operation is not free of charge, please pay attention to proper operation.
4. There are some financial binding machines that can adjust the punching margin. When adjusting, pay attention to the matching of the margin distance and the diameter of the rubber ring; It may be wrinkled; it may also cause too much space between each page, affecting the overall appearance, and it may return to the page after a long time of use.
5. When binding by the hot-melt financial binding machine, the documents should be neatly arranged before they can be put into the envelope. Otherwise, the bound documents will be uneven; In this way, the bound text will be neat and tangible; in addition, it should be noted that when it is not cooled after heating, do not flip the text, otherwise it will easily cause loosening and falling off.
6. Use better binding materials (aprons, hot-melt envelopes, etc.) to ensure the quality of binding and avoid damage to the machine.
Declare: The above methods are derived from the program system index or shared by netizens. They are for your reference only and do not represent the research views of this website. sex and authority.
