How to use the battery of the electronic scale Maintenance tips of the electronic scale
The special battery for the electronic scale is an important part of the electronic scale. At present, most of the electronic scales on the market are dual-purpose, which can be powered by alternating current or special batteries. In the process of using the electronic scale battery, you need to pay attention to the following points:
1. Please check the appearance of the electronic scale battery before use. In case of leakage or damage, it is recommended not to use it, so as not to cause corrosion and damage to the electronic scale.
2. The battery of the electronic scale cannot be used in a closed or high temperature environment (recommended circulating temperature is -5～35℃.)
3. The batteries of the electronic scale should be connected in parallel When using, please arrange according to the polarity of the battery marks “+” and “-“, and the distance between the batteries should not be less than -15mm.
4. If the batteries need to be used in parallel, generally do not exceed three groups (only) in parallel.
5. When the electronic scale is used for the first time, please charge the battery of the electronic scale first. It is recommended that the first 2-3 charging times be 18-24 hours to ensure that the battery enters a safe and stable working state.
6. In the normal weighing state, when “power shortage indication or power shortage alarm” appears in the weighing window, it means that the battery power is insufficient. Please charge the battery as soon as possible. 18 hours. When the battery is fully charged, disconnect the AC power supply for use, such as long-term use of the AC power supply will shorten the battery life (no effect on the scale).
7. When not in use for a long time, please charge the battery at least once every 3 months. It is recommended to charge the battery for about 20 hours each time to make up for the insufficient power caused by the self-loss of the battery, prevent the battery from being damaged, and prolong the service life of the battery. , and put the meter switch in the “off” position to keep the battery from being damaged by over-discharge.
Precautions
(1) Non-professionals are not allowed to open the battery to avoid danger. Please rinse with plenty of water and seek medical attention if necessary.
(2) When using multiple batteries, pay attention to the correct connection between the batteries, and be careful not to short-circuit.
(3) Avoid strong vibration or mechanical damage during use
(4) Use a battery container with ventilation holes on the top and bottom for heat dissipation.
(5) Please don’t let rain water on the battery, or immerse the battery in water.
(6) Please use a damp cloth that is wrung out as much as possible to clean the battery. Please do not use a dry cloth or duster, etc., and do not use chemical cleaning agents to clean the battery.
(7) Do not mix batteries of electronic scales with different capacities, new and old, and different manufacturers in the same box.
Electronic scale battery maintenance tips
Today’s weighing scales have entered the electronic age, so batteries are used, usually our scales. Weighers have built-in batteries, and the same electronic scale is no exception. We should pay attention to the methods and methods in daily use. Improper operation methods will shorten the battery life and damage the battery. The following author will teach you several electronic scale battery maintenance skills.
1. Before the electronic scale is used, the corresponding battery should be installed in the scale body and hand-held device.
2. Avoid the electronic scale being shaken and collided violently.
3. Do not disassemble the parts on the electronic scale at will.
4. Undervoltage indication, battery 1 is the power of the meter, and battery 2 is the power of the scale. When the battery voltage is insufficient, please charge it in time to avoid data loss or inaccurate weighing.
5. When it is not used for a short time, please use the “wireless remote control” button of the instrument to control the scale body to shut down, then turn off the power of the instrument, and use the instrument to control the scale body to start up when it is turned on. When not in use for a long time, please remove the battery of the scale body to avoid over-discharge.
6. Battery charging and maintenance, it is forbidden to over-discharge the battery (the battery placed on the scale body should not be removed and charged for a long time), and the unused battery or instrument should be charged regularly.
From the above, we can see that regular maintenance of the electronic scale battery is very necessary, because it can prolong its service life and reduce business expenses.
