How to use electric box guitarUse
1. Is there a switch for equalization? Does the equalization work when no speakers are connected?
Equalization does not require a switch. The equalization system will work automatically as long as the speakers are connected, and the equalization will not work when no speakers are connected.
2. What do the low, mid, and high frequency band settings mean?
The equalization adjustment is to adjust the overall output tone of the guitar after it enters the amp. It has nothing to do with the pitch of the guitar. The effect of UHF and IF fine-tuning is very subtle. You need to listen carefully to hear the difference. It is also related to the quality of the connected speakers. It is difficult to show the poor quality speakers.
3. What is the default key of the guitar? If the song is in the key of D, does it need to be tuned?
The tuning of the guitar is absolute pitch , it doesn’t matter what tone. The key of the song is reflected by changing chords and positions, etc., and has nothing to do with guitar tuning. Except for individual songs that require special tuning, in general, the key conversion of songs does not require additional tuning.
4. Can the guitar be connected to the computer speakers? How to connect?
Yes. The general computer input hole is the “mic” input hole, and this interface is generally a 3.5mm hole, as long as a 6.5mm to 3.5mm interface is used. Of course, in theory, such a connection can be used and there will be sound, but we still recommend using a professional guitar amplifier, which will have a much better effect, because the general computer multimedia speakers are full-range speakers, and special guitar speakers It is not full frequency, which is more conducive to the display of guitar tone.
5. What if you want to record with an electric box guitar?
There are usually two methods for guitar recording:
(1 ) inside the recording. Connect the guitar cable to the sound card or the mic input port of the computer. As for the use of recording software, that is another big topic, you can find some tutorials.
(2) External recording. Use the microphone to connect to the sound card and record the sound of the guitar. This method can better reflect the tone of the guitar and the skills of the hand. But it needs a good recording environment and relatively high requirements for recording equipment.
6. The tuner seems to be less and less sensitive, and the sound becomes smaller after connecting to the speaker, why?
Please check the battery Is the battery level too low, is the “LOW BATTERY” indicator on the EQ on? If so, please replace the battery. Generally, supermarkets will sell 9v alkaline batteries.
7. Is there any special attention to the adjustment of the balance? Are there any specific regulations?
The adjustment of the balance is based on the personal preference of the tone And the actual equipment is adjusted, there are no regulations and guidelines, as long as you feel good about it.
8. What is the difference between the Canon head and the 6.5mm audio interface? How to use it?
The use of these two interfaces actually depends on the specific The Canon head is more used to connect to professional sound cards or mixers, while the 6.5mm interface is generally used for direct access to speakers.
How to connect the electric box guitar to the speaker
1. The connection line of the electric box guitar speaker is commonly known as the shielded cable, also known as the coaxial cable, and the plug specification is 6.5mm . The way to directly connect the electric box guitar to the speaker is to connect one end of the guitar and the other end directly to the speaker port, and then adjust it. If the interface is too small, you can buy an adapter (3.5mm to 6.5mm).
2. If you want more timbre changes, you can connect a guitar effector. You only need to press your foot twice to switch timbres during performances, which is very convenient. If you connect the guitar effector, you also need two audio cables, one is connected to the guitar and the effector, and the other is connected to the speaker from the other end of the effector. Students who find it troublesome and do not need to perform can ignore this point.
3. Turn down the volume when connecting the audio cable, otherwise it will generate a lot of noise. After the connection is completed, it needs to be debugged before use.
Declare: The above methods are derived from the program system index or shared by netizens. They are for your reference only and do not represent the research views of this website. sex and authority.
