Electronic passwordCodeSafeHow to use the safe
I. Introduction to coding:
1. Personal password setting: After pressing the # key, enter the factory password “1234”, press the # key to confirm, the display shows “OPEN” to open the door. When “OPEN” is displayed, press the * key, the display will display “-“, enter a 1-8 digit password, press # to confirm, it will display “INTO”, and the password setting is complete.
2. Management code setting: After pressing the # key, enter the factory password “123456”, press the # key to confirm, the display shows “OPEN” to open the door. When “OPEN” is displayed, press the “*” key, the display will show “-“, enter a 1-8 digit password, press the “#” key to confirm, it will display INTO, and the password setting is complete.
2. Open the door: press the # key to enter the password, then press # to confirm; if the password is correct, it will display OPEN, otherwise it will display ERROR, please re-enter. Note: Press the red button to restore the password to “1234”.
3. Set the alarm state: press the “0” key when it is static, it will enter the alarm after displaying “BELL ON”, once it shakes, it will alarm for 30 seconds, and then continue to be in the alarm state, enter the correct password, and alarm lifted. If the code is wrong for three consecutive times, the alarm will be alarmed for 30 seconds. Enter the correct code and the alarm will be lifted.
4. Undervoltage indication: When the battery symbol on the lower right foot of the display screen shows the symbol of insufficient battery voltage, the electronic lock can still be opened more than 100 times, but please replace the battery as soon as possible.
5. Clock setting: in static state, press the “*” key, the first digit of the display will flash, at this time press 0 or 8 to set, press the # key to move the flashing position, and when the setting is over, press # key to confirm.
6. Display blanking: before entering the password, press the # key, then the * key, and then enter the password, the password will be displayed as “mouth”.
7. Delete wrong code: in the process of inputting the password, you can press the “*” key to delete the character.
Eight, mute off: in static state, press *66, the buzzer will respond every time you press a key, in static state, press *633, then when you press the “#” key, the buzzer will sound Not responding.
9. Open door record query: After entering the correct password to open the door, when the “OPEN” displayed on the screen disappears, but the light is still on, press the “0” key. The display screen shows the last time the door was opened and which password was used to open the door. “PASS1” is the personal password to open the door. “PASS2” is the management password to open the door. When the “PASS” displayed on the screen has not disappeared, press the “0” key again, the last door opening record will be displayed, and so on, you can check the time record of the previous 14 door opening times.
10. Reset button: Press the red button on the inside of the door, all passwords will be restored to factory passwords.
How to set a safe password
1. First we need to open the safe, the initial password is generally It will be displayed directly on the manual or someone else told us.
2. Press green # to enter our password, and press # to confirm. Then you can open it with the key.
3. When changing the password, first click the green key behind our safe, and then you can directly enter our password. After entering our password, it will be displayed again after successful.
4. At this time, our original password cannot be used, and we can only open it with a new password. If we enter the wrong password 3 times, it will alarm until the alarm is cleared.
