How to use the remote control of OP lamps
The remote control of OP ceiling lamps is a separate control remote control switch, the brightness is segmented, and the brightness of each light color on some remote controls is different There is a corresponding button, you can press whichever brightness you want.
And some Oppo ceiling light remote controls only have two buttons, two left and right, or up and down arrow buttons. Each time you press it, the brightness will be different. This is not very useful.
The remote control of Oppo ceiling light is mainly used to adjust brightness, color temperature and color. Of course, the switch function is essential, and it can only be used to control the color of RGB, that is, colorful light. The remote control of white light can control current and voltage to control light and shade. There are few buttons on the remote control, just click to change a color, and consumers can adjust it according to their own preferences.
Operation Ceiling Light Remote Control Pairing
The Opple Ceiling Lamp Remote Control has 1-4 kinds of heating and cooling “Preset color tone”, this switching function can be realized by continuous switch or remote control. The light source can be adjusted from bright to dark, from white to yellow, mainly according to the light source requirements at different time periods to meet the environment. Since the remote control attached to the lamp cannot be used directly, you need to perform the code matching by yourself. The following are the steps for the remote control of the Oppo ceiling lamp:
1. First of all, the wall power switch needs to be powered off for dimming and coloring the lamp 10 seconds or so.
2. Then prepare the remote control, first select one of the 6 groups of switches on the remote control to be docked.
3. Next, turn on the wall switch. When the lamp is powered on, point the remote control at the lamp, and press the “I” button of the switch 3 times continuously. At this time, the code is successfully matched after the lamp changes color.
4. Finally, press the “O” button again. If the light can be turned off, the docking is completed, and then press the corresponding dimming button to adjust the brightness according to your needs.
Operation Ceiling Light Remote Control Settings
First, the Opple Ceiling Light should be powered on, the buzzer will sound once, power off for 1 second, then power on again, the buzzer The buzzer sounds twice, and then press the largest button of the shaker (all lights). The buzzer sounds once, and the pairing is completed.
Operation ceiling light remote control switching method:
1. If there is a single ceiling light, you can choose the ultrasonic remote control lamp head, or the ultrasonic remote control switch.
2. If there are multiple ceiling lamps, the remote control contactor can be selected when it needs to be bright and dark at the same time.
3. If there are multiple ceiling lights, you can choose the remote control segment switch if you do not need to light and dark at the same time. A lamp remote controller belongs to the technical field of control. OP Ceiling Lamp Product Daquan>>
