1. How to use the woodworking Buddha statue engraving machine
1. Fix the materials to be engraved on the engraving machine, and use screws and buckles. Note: Try to make the horizontal and vertical directions perpendicular to the horizontal and vertical directions of the engraving machine.
2. Install the milling cutter.
3. Open the operating system of the engraving machine.
4. Load the engraving file to be engraved (the file type is NC)
5. Set the origin: turn on the power of the engraving machine, turn on the spindle rotation, and then click the manual button, first Set the Z axis, click the Z- button to make the table height between the milling cutter and the engraving machine 0, and then click the number behind Z at the workpiece coordinate to make it 0.
Then set the origin of X-axis and Y-axis, by clicking X+X-Y+Y-, the milling cutter is located in the lower left corner of the material to be processed, and then click the number behind XY at the workpiece coordinate to make Both are 0. Set the coordinate origin and you are done!
6. Simulation. Click the simulation button to check whether the engraving path is correct. If there is no error, click the simulation button again to cancel the simulation.
7. Start. Everything is ready, click the start button to start engraving, and adjust the engraving speed according to the hardness of the engraving material.
8. Pause. If the milling cutter breaks or other emergencies occur during the engraving process, you can press the pause button.
2. Precautions for using the Buddha statue engraving machine
1. The head of the woodworking Buddha statue engraving machine rotates at a high speed during the operation, and do not touch the head with your hands and milling cutters.
2. The head of the woodworking Buddha statue engraving machine will generate a high temperature when it works for a long time, so the cooling circulating water must be turned on when the engraving machine is working, otherwise the head will burn out, causing unnecessary economic losses. .
Three, what should I do if the Buddha statue engraving machine gets deeper and deeper
Many people who use the Buddha statue engraving machine, especially those who have not received professional guidance, have I have encountered such a problem, the engraving machine will get deeper and deeper after using it for a period of time. From another point of view, the z-axis is faulty, so what should I do if the engraving machine gets deeper and deeper?
1. The most common reason is the failure of the z-axis drive block. We can simply test it: change the positions of the x-axis and z-axis drivers, and then start the test. If the z-axis problem is solved, it means that The drive block is faulty. It may also be caused by the looseness of the z-axis motor coupling, which needs to be tightened with a wrench.
2. There may also be a problem with the z-axis motor. If this is the case, you need to contact the manufacturer for repair or replacement.
3. Another possibility is that the control system is damaged by Trojan horse programs. Users who are connected to the computer will inevitably be disturbed by Trojan horse programs. After the control system is damaged, some inexplicable problems may occur, such as The deeper the engraving machine is, the deeper the engraving is or the shallower the engraving is, the machine is engraved randomly, etc. When encountering such problems, it is necessary to disinfect or reinstall the engraving software in time.
Declare: The above methods are derived from the program system index or shared by netizens. They are for your reference only and do not represent the research views of this website. sex and authority.
