[Installation of floor fan]Installation and use of floor fan without opening the head cover of floor fan
Installation and use of floor fan strong>
How to install the floor fan This is a concern of many people who buy floor fans, but many people do not know the installation of floor fans, so how to install floor fans Woolen cloth? Below, I will tell you in detail how to install the floor fan.
Installation method of floor fan
I. Chassis installation
First take out the elbow screw and the pressure plate from the column, insert the column into the base, place the pressure plate on the bottom of the chassis, and tighten it clockwise with the elbow locking screw.
Second, overall installation
1. First loosen the lifting lock nut, pull the lifting pipe out of the column, and then use the lifting lock nut Lock up goodies.
2. Loosen the clamp nut at the lower part of the fuselage, insert the fuselage into the lift pipe, and tighten the clamp nut.
3. Loosen the lifting lock nut, adjust it to the required height, and tighten the nut.
3. Install the rear grille
Unscrew the fan blade fixing nut from the motor shaft, then unscrew the triangular nut, and then install the rear grille.
Fourth, install the fan blade
When installing the fan blade, the groove behind the fan blade should be stuck on the limit pin of the motor, and then reverse the Tighten the fixing nut clockwise. Please refer to the instruction manual for the method of illustration.
How to use the floor fan
After assembly, plug in the power plug, press the power switch, and then select the fan speed gear as needed. Plug in the power plug before it is assembled and turn it on.
Cleaning method of floor fan
This machine only needs to do general external cleaning and maintenance, wipe it with neutral detergent, and then wipe it with a clean soft cloth Clean, avoid wiping with thinner, toluene, acid lotion, oil, etc. to avoid discoloration or deterioration.
Precautions for using floor fan
1. Do not use it in places where it is easy to be sucked in such as curtains.
2. During operation, it is absolutely forbidden to insert hands or foreign objects into the mesh cover, which will cause injury or damage.
3. When not in use for a long time, be sure to pull out the power plug.
4. It is strictly forbidden to use the power plug without assembly.
5. Turn off the power before pulling out the plug. Do not pull the power cord, but pull out the power plug, otherwise it will cause short circuit and electric shock.
6. Do not move the fan when it is turned on, and do not change the orientation by hand when shaking the head automatically, so as not to damage the shaking mechanism.
Buy.com I summarize: The above is the little knowledge I provided to you today about how to install the floor fan. If you don’t know how to install the floor fan, you can refer to this article accordingly, I hope it will help you. help.
