Integrated ceiling space maintenance
Kitchen integrated ceiling maintenance
Cleaning points: a small amount of dishwashing liquid, cloth with better water absorption
Maintenance points: Ventilation to dry naturally, wipe with a paper towel when the sun is not good; do not touch the lighting circuit with water
Maintenance of the bathroom integrated ceiling
Cleaning points: no oil stains Clean with a soft cloth and water
Maintenance points: clean once every one to two months, less cleaning and care of poor boards
Maintenance of integrated ceiling in living room, bedroom and corridor
Cleaning points: Remove dust with a soft cloth
Maintenance points: It is better to clean cheap gussets less frequently; deep cleaning once a year
Integrated ceiling module maintenance
Integrated ceiling lighting maintenance
Try not to switch on and off frequently when using the lamp, because at the moment of frequent startup, the current through the filament is greater than the current during normal operation, which will cause the filament temperature to sharply increase Lifting accelerates sublimation, which greatly reduces its service life, so try to minimize the switching of lights. After the lamp is used for a period of time, the luminous flux will drop significantly, and the lamp will become darker and darker. At this time, attention should be paid to replacing the new lamp source in time.
Integrated ceiling ventilation maintenance
Do not switch on and off the ventilation fan frequently, remove oil stains regularly, and do not use corrosive chemical solutions when cleaning, otherwise it will easily damage the plastic parts and outer paint. Lubricate the motor regularly. When re-installing the ventilation fan after cleaning, the fan blade nut must be tightened. It is also necessary to regularly conduct regular insulation inspections on power supply lines and electrical equipment, and promptly deal with any damage found. Keep your bathroom ventilated, clean and dry on a regular basis to prolong the life of appliances and panels.
Integrated ceiling heating maintenance
Do not switch the heating module on and off frequently, and ensure that there is no large vibration around during operation, otherwise the service life of the heating bulb will be affected. When it is turned on after not using it for a long time, do a circuit and light bulb inspection, and turn it on for 3-5 minutes to see if it operates normally. If there is any problem, please ask professional technicians to overhaul.
Maintenance of integrated ceiling gussets
If there is any oil stains, use dish soap and a soft cloth dampened with water to clean, you can scrub hard in the middle, but When using the surrounding area, use light force, do not scrub with hard objects and cleaning balls, which will leave small scratches. The film-coated board is deeply cleaned once a month, and the drawing board and the nano-roller coated board are cleaned once every six months or even a year. If there is no oil stains, just scrub with a soft cloth and water, and the quality of the gusset plate is poor and does not require frequent cleaning.
Integrated Ceiling Lighting Appliance Maintenance
Precautions for Integrated Ceiling Installation
First, use the correct installation method and screws. Avoid shattering of the drywall core and rust spots on the ceiling.
Second, the joints of the ceiling should be done well. It plays a decisive role in avoiding ceiling cracking.
Third, the yin and yang corners of the ceiling should be handled well. It not only makes the sun angle straight, but also protects the sun angle well.
