1. Material for electric vehicle awning products
1. The canopy
is made of high-tech composite materials (glass fiber reinforced plastic).
2. Use imported stainless steel pipes to produce tents.
3. Use PC solid sheet to produce panel and side panel.
4. Use special electric wipers to automatically scrape rainwater.
Second, introduction of electric vehicle awning materials
1. Features of FRP: light weight, high strength, anti-corrosion, heat preservation. Its strength is several times that of ordinary plastic sheets, and its strength is greater than that of steel and aluminum. FRP sheet has the characteristics of high temperature resistance, aging resistance, friction resistance and so on.
2. Characteristics of stainless steel: good ductility, corrosion resistance, heat resistance, cleanliness and high finish. Because no surface treatment is required, it is simple, easy to maintain, and has good welding performance.
3. Features of PC solid sheet: good light transmittance, flame retardant, weather resistance, temperature resistance, good processability and light weight.
Third, is it better to have an electric car awning or a raincoat
1. Convenience
First of all, in terms of convenience, the convenience of the awning may be higher. After all, the awning can be installed directly, and it does not need to be like a raincoat. If you wear it often, you can drive it directly when it rains, and there is no problem of needing to fold it up after you get home. Although the canopy is relatively large, it will affect the convenience of parking some electric vehicles, but relatively speaking Its convenience is still much higher, and it can also be used to block the sun in summer.
2. Rain shelter
In terms of rain shelter, the two should be similar, although the canopy seems to cover the area of the rain It is relatively large, but the actual rain shielding effect is not so ideal. Usually, the car will still get a lot of rain when it is parked, and it is easy to let the rain drift in during the driving process, especially in winter in some windy weather. Under the action, the angle of rainwater falling will not be straight up and down, and it may float in from front, back, left, and right. Of course, this phenomenon will also occur on raincoats. Basically, raincoats can cover the rain that can be covered. The rain that cannot be covered by the canopy, the effect of the raincoat will not be too good!
3. Safety
As for safety, raincoats are definitely much better. At present, many cities are already compulsorily removing canopies , the reason is that the safety of the canopy is not enough. After installing the canopy, the resistance of the electric vehicle is obviously much larger than that without installation, which will not only impose a greater burden on the battery of the electric vehicle, but also affect its flexibility in turning and other operations; in addition, The canopy also significantly increases the height and width of the electric vehicle, which will affect pedestrians on the road to a certain extent and increase the probability of the electric vehicle colliding with pedestrians. If it encounters strong winds, this canopy is even more dangerous. Even if it is parked on the side of the road, it is easy to be blown over by the wind. If pedestrians are not careful, they will easily be crushed by a dumped car. Raincoats do not have these worries at all.
In general, although the rain canopy is more convenient than the raincoat, from the perspective of safety, the editor recommends that you choose a raincoat when choosing a rain cover for an electric vehicle. Every time you drive, you need to wear some clothes, and you can’t put it directly on the car to cover the rain, but it is indeed much better in terms of safety. It is obviously not worthwhile to exchange safety for a little convenience!