During the process of running
, water will penetrate from the mouth of the shoe and the seam line. It is best to use leggings to prevent water from entering the mouth of the boot. Water repellent can improve the waterproofness of the upper and stitching. Repeat the application of the waterproofing agent for a period of time, while the hiking boots must be kept dry and clean. The waterproofing agent must be applied to the sutures and pinholes. One to two days before the activity, the waterproofing agent must be applied to the upper to allow the leather to fully absorb. The leather is dark brown. And pay attention to the manufacturer’s precautions for use. Nylon hiking boots are not easy to be waterproof because of their many pores. Silicon-based sprays can be used, regardless of whether any boots must be kept dry.
Well-maintained hiking boots can last for several years, and they should be cleaned frequently to avoid mold growth. After each cleaning, they must be covered with shoe forks or newspapers to keep the boots dry, and avoid high temperatures during the drying process of hiking boots. , The wear rate of the sole is faster than that of the upper. Generally, the high-priced hiking boots can replace the sole, and the updated sole will be tighter because the upper has changed the original size. Regardless of choosing a suitable pair of hiking boots, you still need to try them on and walk for a few days. Walk for a few hours a day near your house and gradually increase the distance. If blisters appear on the bottom of your feet, try adding an extra pair of socks. If blisters appear on the top of your feet, wear socks. Thin or remove the insole, the heel is frayed, and the shoelace is fastened. If the ankle is bruised, the shoelace is not tied to the metal hook groove at the top. If it does not work, replace the shoes. Maintenance Precautions.
Maintenance of leather products
Keep it clean, do not touch any adhesives mentioned, thick mud let the wind dry and clean up. Do not use fire to dry hiking boots, the leather will dry, wrinkle and the heat-sensitive adhesive will melt the sole. Spray the inside of the boots with fungicides to prevent mildew and deodorize. It is very important to keep the feet clean with clean socks and clean feet. It is best to wear two pairs of socks, one pair of wool socks and the other pair of synthetic fibers. In this way, the friction between the socks can be reduced. The thin socks on the inner layer will transfer sweat to the thick socks on the outer layer for absorption and the thick socks can be insulated from the boot pads. The socks should not be too thick (pressing the toes) and too thin (there is too much space) Let the foot rub against the sole of the boot causing blisters).