Maintenance of common faults of massager
1. No vibration, the main reason is the power lead and open fuse ; The plug or switch is in poor contact; the motor is broken or the coil is open circuit, etc.
2. Vibration strength adjustment fails, common reasons are: poor strength switch, open lead, damaged rectifier diode, etc.
3. Abnormal noise is made during use, the main reasons are that the distance between the fixed iron core and the movable iron core is too close; the rubber pad between the two iron cores is damaged or lost.
4. The vibration is too weak or too strong, the main reason is the improper adjustment of the distance between the two iron cores.
5. The motor runs normally but does not vibrate. The main reason is that the eccentric hammer falls off, just re-install it.
Precautions for using the massager
1. Choose a suitable one according to your actual needs and requirements such as your height, body shape, and the parts that need to be massaged
2. Before using the massage equipment for the first time, be sure to read the instruction manual in detail;
3. Follow the principles of intensity from light to heavy and time from short to long Use the massager;
4. If you experience dizziness, abdominal pain, and body aches after using the massager, you should stop using the massager and consult a doctor or product manufacturer;
5. It is best not to use the massager on an empty stomach or within 30 minutes after meals;
6. Women during menstruation or pregnancy should use the massager with caution;
7. When using the device, consult a doctor first to avoid danger due to improper use;
8. The elderly and children especially need to pay attention to controlling the intensity and time of massage;
9. It is forbidden after strenuous exercise
10. It is forbidden for patients with skin diseases to massage the affected part;
11. It is not allowed to massage the tumor part and the trauma part;
p>
12. When using the massager, be careful not to place the massager on an unstable ground (or table);
13. After using the massager, the power supply should be cut off to avoid prolonged use of the massager in power-on state.
