[Notebook Film]How to tear the protective film to teach you how to tear off the aging notebook screen protector perfectly
Computers generally use two kinds of protective films, one is PE protective film and the other is PET protective film.
PE protective film is mainly used for the protection of plastic parts such as computer case shell, base, monitor, etc., to prevent the computer from being damaged, scratched and dirty during assembly and transportation, and plays a role in surface protection. The common thickness is: 0.05mm-0.15mm, the viscosity is mainly medium and low viscosity, and the color is mostly transparent, which depends on the needs of the manufacturer, and the use standard is not fixed.
PET protective film is mainly used for computer screen protective film, the common types are: PET double-layer protective film (acrylic glue), PET single-layer protective film. Special requirements are: PET silicone protective film, PET anti-scratch protective film, PET frosted protective film. More special screen protectors will also be printed and processed again to make the protective films required by customers.
The PET anti-scratch protective film is the most widely used computer screen on the market now, because some protective films are highly transparent and have strong anti-scratch performance, up to 3H or more, and also have anti-scratch protection. Anti-static function of electrostatic protective film. The product itself has good exhaust performance. Whether it is pasted by itself or machined, it can automatically exhaust and eliminate air bubbles, making the computer screen more beautiful, and has no effect on the visual effect.
So, how to remove the aging laptop screen protector? The notebook protective film is usually composed of two layers of protective film, one is a peeling film, when the notebook shell is filmed, the first thing to tear off is the peeling film. The other layer is the protective film, which is the part attached to the notebook case. Most of them are made of PET material, and the A-side film with special adhesive is used, and the adhesive is coated on the protective film. Therefore, it is also called double-layer PET protective film.
After sticking the film on the notebook case for a long time, the edge of the film is wrinkled or worn, or the film needs to be replaced due to aesthetic fatigue. How to remove the film? What should I pay attention to when removing the film?
How do I remove the foil? Many people’s answer must be very simple: “Tear it off directly and it’s over!” In fact, it is not. For example, if the action is too large, the LOGO logo text surface of the notebook casing will often be glued down due to the adhesive of the film, which will affect the appearance. Or leaving unsightly glue residue on the surface of the case, etc. The specific operation process is as follows:
First, shut down the notebook. When the temperature of the surface of the notebook case is about the same as the room temperature, choose an edge of the film, and then peel it off slowly without excessive force.
If your notebook shell has a LOGO logo, and the special adhesive film has been applied, then when tearing to the position of the LOGO logo, you can fully wet the LOGO logo with a little water, 5 to 10 minutes, then tear it off.
