[Plastic Welding Gun]Plastic Welding Gun Model The gun is the same as the ordinary household hair dryer, that is, the heat generated by the heating wire is taken away by the wind generated by the motor, so as to obtain flowing hot air, but the air pressure generated by the plastic welding gun is larger (the type II plastic welding gun is larger than 2800Pa), the temperature of the hot air is as high as 550℃ or more, which is the fundamental difference from the hair dryer.
Thermoplastics are easy to form and process due to their good corrosion resistance to acids, alkalis and salts. Therefore, it is increasingly widely used in the manufacture of various anti-corrosion equipment and utensils in industrial and agricultural production. “Welding plastic gun with wind” is an indispensable tool for welding plastic sheets into various shapes of plastic equipment with plastic electrodes.
DSH-Xplastic welding torch
DSH-X type PP/PVC welding torch, the plastic welding torch adopts double insulation , safe and reliable; only need to connect 220V alternating current, you can carry out plastic processing operations, the power of the welding gun heater can be changed in a wide range, so as to meet the welding temperature requirements of different materials of plastics and different specifications of welding rods. In addition to welding, plastics can also be thermoformed, butted, etc., and other departments that require hot air heating are also used as hot air sources.
DSH-Dtype plastic welding torch function
This plastic welding torch has the general performance of other plastic welding torches, electronic temperature control Continuously adjustable, high temperature control accuracy, reliable performance, compact structure, long service life, excellent performance to ensure continuous, stable and reliable operation at high temperature for a long time, with small size, light weight, easy to use and so on. Replacement of different nozzles can meet different welding needs. The current price is 750 yuan.
Plastic welding gun model
Plastic welding gun model, such as: M6*45-0.8, where M6 is the thread size, commonly used are M6 and M8, among which 45 is the length of the contact tip in mm, commonly used are 25mm, 28mm, 30mm, 40mm, 45mm, of which 0.8 is the aperture size of the contact tip MM (that is, the contact tip with the same aperture as you use), commonly used are 0.8MM, 0.9MM, 1.0MM, 1.2MM, 1.4MM, 1.6MM, 2.0MM.
How to use plastic welding torch
How to use:
1. When working, first heat Adjust the power of the device to the lowest gear, and then gradually increase it according to the welding needs after power-on to reach the ideal temperature required for welding.
2. Before stopping the machine, point the knob to 0°C, blow the air for a few minutes, and wait for the barrel to cool before shutting down, so as to avoid the residual heat from burning the parts.
3. When operating, touch the barrel of the gun in a hurry to avoid burns. After use, it should be handled with care, so as not to damage the parts inside the gun and affect the service life.
