[Principle of Oxygen Machine]How does the oxygen machine work for fish farming
Everyone When you go to the park to play, you can see ponds. Most of the ponds will raise carp or other fish for tourists to watch and feed. These fish in the pond can swim freely and the air is fresh. However, domestic fish need to be kept in a fish tank, and they also need an oxygen machine to give them oxygen. This is an essential configuration for home fish. But everyone does not know the working principle of the oxygen machine. Today I will introduce the working principle of the oxygen machine to you, so that everyone can know how it works.
The oxygen generator for fish farming has low equipment cost, small size, light weight, simple operation, convenient maintenance, low operating cost, convenient switch, No pollution, very good for fish farming. The whole system of fish farming machine consists of the following components: compressed air purification components, air storage tanks, oxygen and nitrogen separation devices, oxygen buffer tanks; if filling cylinders is required, an oxygen booster and a bottle filling device are installed at the end.
The working principle of oxygen machine for fish farming:
1. Compressed air purification components
Air compression The compressed air provided by the machine is first passed into the compressed air purification component. The compressed air first removes most of the oil, water and dust through the pipeline filter, and then further removes water through the freeze dryer, and the fine filter removes oil and dust. Deep purification is carried out in the ultrafine filter that follows.
2. Air storage tank
Reduce airflow pulsation and play a buffering role; thereby reducing system pressure fluctuations and making compression The air smoothly passes through the compressed air purification components to fully remove oil and water impurities and reduce the load of the subsequent PSA oxygen and nitrogen separation device.
3. Oxygen and nitrogen separators
There are two adsorption towers, A and B, equipped with special molecular sieves. When the clean compressed air enters the inlet end of the A tower and flows to the outlet end through the molecular sieve, N2 is adsorbed by it, and the product oxygen flows out from the outlet end of the adsorption tower. After a period of time, the molecular sieve in Tower A is saturated with adsorption. At this time, tower A automatically stops adsorption, and compressed air flows into tower B to absorb nitrogen and produce oxygen, and regenerate the molecular sieve of tower A.
4. Oxygen buffer tank
The oxygen buffer tank is used to equalize the pressure of the oxygen separated from the nitrogen-oxygen separation system And purity, to ensure continuous supply of oxygen stable.
The above is the working principle of the oxygen machine. After understanding the working principle, it will be more familiar in use. Fish live in water, and oxygen is very necessary. You can’t watch it all the time and help it change the water, so an oxygen machine is necessary. Without oxygen, the fish will die. Take good care of animals when you buy them home, so get your fish on oxygen as soon as possible. That concludes my introduction to the oxygen machine today.
