First, reduce the condensing temperature of the chiller produced by environmental equipment. To meet the safety and production requirements of the chiller equipment, try to increase the evaporating temperature of the chiller and reduce the condensing temperature of the chiller. To this end, the transformation of the cooling tower of the chiller has been increased to ensure the cooling water efficiency of the chiller.
Secondly, adjust the reasonable operating load of the chiller equipment. Under the condition of ensuring the safe operation of the chiller equipment, the power consumption per unit cooling capacity of the chiller is more minor when the central unit of the chiller runs at 70%-80% load than when it runs at 100% load. Using this method, the startup of the chiller should be comprehensively considered in combination with the operation of the water pump and the cooling tower.
Third, prevent and reduce the scale of the pipes on the chiller to improve the heat exchange between the condenser of the chiller and the evaporator of the chiller Efficiency Makeup Water If the water treatment is not done correctly, the calcium carbonate and magnesium carbonate produced by the heating of calcium bicarbonate and magnesium bicarbonate will deposit on the chiller pipes.
The thermal conductivity of the chiller will be reduced, the heat exchange efficiency of the chiller condenser and the chiller evaporator will be affected, and the electricity cost of the chiller equipment will be significantly increased. . At this time, in addition to adopting the water treatment technology of the chiller, it is also possible to use the regular automatic cleaning equipment for the chiller pipeline to clean the chiller pipeline.