SKYWORTH washing machine tutorial
1. Place the washing machine on a solid and level ground, adjust the installation, and connect the water inlet hose to the Connect the faucet to the water inlet of the washing machine, open the faucet, remove the drain pipe and insert the pipe head into the floor drain.
2. Plug in the power plug and press the power button to turn on the power of the washing machine.
3. Put the clothes that need to be washed and dehydrated into the SKYWORTH washing machine bucket, determine the laundry selection, and set the washing program.
4. Select the high, medium and low water levels of the water level switch according to the amount of laundry to be dehydrated.
5. Then start the washing machine, the water inlet solenoid valve is turned on, and the water inlet starts. (At the same time, flush the detergent placed in the detergent container box into the machine beforehand)
6. When the water level reaches the predetermined position, the water level switch is turned on, the water inlet valve is closed, and the washing machine starts to run automatically (Washing—rinsing—dehydration complete).
7. When the whole washing process is over, the washing machine will automatically shut down after beeping.
8. It is recommended to read the instruction manual before use.
Power-saving method of Skyworth washing machine
Skyworth washing machine power is about 400 watts, and the power consumption is less than 0.5 degrees. It is controlled at about 1200~2250 watts. Even if the water temperature is increased to about 60 degrees by heating during washing, the power consumption is about 1.5 degrees, so it is more energy-saving and power-saving. In addition, the two-child policy has been fully opened now. Many families have two babies. Ordinary washing machines cannot meet the clothes of the whole family, but the large capacity of Skyworth washing machines can be easily handled.
Use the quick wash mode
After a lot of practice, it is found that the same washing cycle, if you choose the gentle mode, the number of reversals will increase, and this operation will cause the motor to start repeatedly. At this time, the starting current of the motor directly exceeds the rated current by 5~7 times, so choosing a weak wash will cause electricity consumption. If the clothes are not particularly dirty, you can choose the quick wash mode, which saves water and time.
Strictly control the washing capacity
When washing clothes, the quantity of clothes must be strictly controlled. For example, if the washing capacity is 10kg, it is better to wash within 8kg, and it cannot be washed at one time. Too much, otherwise it will cause the motor to enter the overload operation. Overloading the motor will not only cause damage to the motor, but also increase power consumption. If you do not strictly control the washing capacity, even if you use the Skyworth washing machine that everyone says works well, it will still lead to excessive power consumption and even damage the motor.
Controlling the dehydration time
In most cases, the dehydration time of laundry is about 3 to 5 minutes. According to the test, the dehydration rate of clothes can reach 55% in one minute of dehydration; after dehydration for two minutes, basically all the moisture on the clothes is squeezed dry. Therefore, the dehydration time does not need to be too long, and it can be controlled within 3 minutes. SKYWORTH WASHING MACHINE PRODUCTS>>
