[Telephone settings] How to answer the extension setting method of the extension
How to answer the extension p>
There are two types of telephone extensions. One is to divide a telephone line into several lines through a junction box and connect them to several telephone sets. When a call comes, all the telephones will ring, and one telephone is in use. Do not use anything else; another way is to buy a voice switch, you can connect 1 or several outside lines, set a telephone to a main unit, and set the rest as extensions, when the call comes, the main unit rings, and the incoming call After talking with the speaker, broadcast the corresponding extension.
Telephone extension setting method
1. Check the equipment and choose a suitable installation location: carefully check all parts of the equipment before installation If there is looseness, pay attention to whether the power supply is turned off; the equipment should be installed in a dry, ventilated, stable and firm indoor place, and there must be a certain space between the equipment and other equipment to ensure the heat dissipation of the equipment, inspection and maintenance.
2. Install the switch and lay out the telephone line: the host can be placed horizontally or hung on the wall. When hanging the wall, pay attention to avoid the contact between the wall-hanging screws and the circuit board in the machine; Use a special telephone line, do not put it in the same conduit as the antenna and power line, the line should be beautiful, firm, and in good contact.
3. Install the ground wire: Be sure to install the ground wire to protect against lightning; the quality of the ground directly affects the quality of the call, and at the same time protects the safety of personnel.
4. Detect the outside line, connect the outside line and the extension line: Connect the outside line to the crystal head, test the outside line with a phone that can be used normally, and confirm that the outside line can be used normally; The telephone line is connected to the corresponding extension port. The connection method of the crystal head of the telephone line>>
5. Power-on test: after installation, turn on the power, the switch indicator light flashes, indicating that the machine is working normally; then you can test and set according to the contents of the manual whole system.
6, the installation is complete, have a sense of accomplishment!
Precautions
Avoid splashing and raining. If water enters the machine, power off immediately to ensure safety.
During the period of lightning, do not connect the telephone line; try to avoid using the telephone, and cut off the power of the switch if necessary.
Declare: The above methods are derived from the program system index or shared by netizens. They are for your reference only and do not represent the research views of this website. sex and authority.
