The industrial chiller is an important refrigeration device in the industry. In order to ensure its operation effect, it must be tested before the official operation. For this type of unit, it is best to carry out the unit test run of the unit, so what exactly is the unit test run?
The compressor is one of the core components in the chiller. Since the compressor is a single unit, the industrial chiller should be tested as a single unit. Through these test runs, the existing problems can be found and solved as soon as possible, which provides guarantee for the compressor to be put into the load test run. However, there are still many things that need to be paid attention to in the whole process, such as:
Before the single commissioning of the industrial chiller, the installation and commissioning of various components in the system should be carried out to meet the requirements of the commissioning conditions; in terms of time, the device has no load The test run should be no less than two hours, and the time should be extended if the exhaust pressure is under certain conditions. In terms of temperature, the inlet and outlet temperatures of the cylinder liner cooling water and the exhaust temperature of the compressor must be properly controlled.
Shopping Cart