Each industry has its own industry standards, and the dehumidifier industry is no exception. Although the demand for equipment and the actual market are very large, what is the current status of this industry? Can it meet the requirements of the market? Dig deeper.
General dehumidifiers can remove the condensing heat during operation, but the outlet air temperature cannot be adjusted; and regarding the maximum load of dehumidifiers, there are also relevant regulations in the industry standards, that is, the maximum load condition When the voltage is low, the dehumidifier can start and operate normally.
However, the dehumidifiers designed according to this standard do not seem to be ideal in actual use, and the dehumidifiers are prone to failure.
Especially in hot and humid areas, due to the relatively high temperature, and the dehumidifier sends out dry air at the same time, the condensation heat heats the air flowing through the evaporator to dehumidify and cool, so that the air temperature of the dehumidifier is relatively high. Thus, a vicious circle is created, as the temperature increases, the load of the dehumidifier will also increase, the compressor discharge temperature and discharge pressure will rise, and eventually it will be damaged due to overload operation
To ensure the normal operation of the dehumidifier under this circumstance, the machine must be improved, and the most typical example is to add an unloading device to it. That is to say, by adding a water-cooled condenser to remove the excess condensation heat in the dehumidifier, so as to control the temperature rise. In addition to this, reducing the power of the compressor is also a key move, and the dehumidifier can also create a more comfortable environment.