1. What is the floor heating pipe cleaning machine
The floor heating cleaning machine is also called the floor heating cleaning machine, which is mainly used to clean the floor heating pipes. The fully automatic pulse geothermal cleaning machine uses the combination of air, water and electromagnetic pulses to convert the internal vortex power into kinetic energy, and moves at high speed in the form of tiny molecules, through the thermal energy, kinetic energy and electromagnetic pulse during the operation. Decompose the dirt in the pipe wall, and flush out the pipe together with the water molecules to achieve the effect of cleaning the floor heating.
Second, The working principle of the floor heating pipe cleaning machine
The compressed air and water provided by the air compressor are input into the fully automatic pulse In the generator, the pulse generator is controlled by the automatic pulse controller, which emits physical pulse waves of different frequencies and wavelengths according to the cleaning needs. The instrument carries out high-pressure water jet and airflow impact and wave vibration on the inner wall of the cleaning pipeline, peels off the rust on the inner wall of the tube and the deposits in the tube layer by layer, and quickly discharges the tube with the water flow through the end of the tube, and works repeatedly until the cleaning purpose is achieved. .
Three, the technical advantages of floor heating pipe cleaning machine
1. The appearance design has obtained national patents; the practical + fashionable design concept is in the domestic geothermal cleaning machine top of the list.
2. The cleaning work can be carried out by connecting the connecting pipe to the water separator without removing the pipe.
3. No chemicals and chemicals are used, and there is no corrosion to the inner wall of the pipeline and system components, and the discharge will not pollute the surrounding environment.
4. No blockage, suitable for cleaning all kinds of complex pipeline systems.
5. Small and lightweight, easy to operate and clean quickly.
6. The cleaning and inspection method is simple, through observation. You can observe the cleaning and sewage effect, and you can also compare the cleaning before and after cleaning.
7. This equipment can not only clean the geothermal pipes, but also clean the radiators, heat sinks, household tap water pipes, domestic water heaters and suppress the geothermal pipe system.
Fourth, the structure of the floor heating pipe cleaning machine
1. The gas and water automatic pulse generator is the main component for generating high-pressure gas pulses. Air and water are combined to form high-pressure water jet and air flow under the control of automatic pulse controller for cleaning work
2. Automatic intelligent pulse controller and automatic intelligent control pulse generator, according to cleaning needs Emits physical intelligence pulses of different frequencies and wavelengths. This machine has been preliminarily debugged on the automatic intelligent pulse controller when it leaves the factory, and generally does not require the user to debug it again. Only slight changes can be made for the blockage of the pipeline. Due to the addition of this high-tech product, the cleaning process is simple and easy to operate.
3. Air compressor, producing high pressure air of 0, 8Mpa, providing sufficient air power for cleaning.
4. Connect the pipe, connect the washing machine and the geothermal water separator, connect the washing machine and the water source, connect the washing machine and the air compressor, and connect the return water of the water separator to the sewage discharge point.
V. Cleaning procedure of floor heating pipe cleaning machine
(1) Connection
1. Close the main valve separating the water supply and return water of the water distributor;
2. Connect the pulse introduction pipe, and connect the digital computer pulse generator to the head end of the water supply main bearing plug of the water distributor;
3. Connect the water pipe, and connect the water source to the computer pulse generator;
4. Connect the air pipe, and connect the air compressor to the computer pulse generator;
5 , Connect the sewage pipe, one end is connected to the head end of the return water general bearing of the water distributor, and the other end is inserted into the floor drain.
(2) Startup and cleaning
1. Connect the air compressor and digital computer pulse generator power supply, press Turn on the power switch on the lower pulse generator, and start the compressor to make it work up to the rated pressure of 8Mpa;
2. Turn on the compressor gas supply switch and the system water supply valve;
3. Turn on the splitter There is a separation valve on the water heater, and the other separation valves are closed, and one is opened and one is corrected. The physical pulse wave enters the geothermal pipeline to start cleaning. The pulse cleaning frequency can be adjusted according to the length of the geothermal pipe, the installation time and the state of scaling, until it is cleaned.
5. Untie the four connecting pipes respectively;
6. Open the main valve for the separation of the water supply and return water of the water separator;
7. The water separator returns to its pre-wash state.
Notes: All connection parts must be tightened to prevent leakage. When connecting, be sure to insert the tube to the end, and when disassembling, be sure to press the snap ring to the end.
