[Steam iron use]How to use a steam iron? How to use a steam iron
1. When using an electric iron for the first time, you should read the manual first
First of all, the instructions are more careful, whether it is domestic or imported; foreign ones have requirements for voltage, and it depends on whether the voltage of the iron matches.
2. Plug in the power
Turn off the steam button first, then lift the iron slightly, and use the measuring cup provided to slowly pour tap water from the water inlet. Slow injection; if you want to better maintain the steam iron, it is best to use boiled and cooled softened water to prevent limescale.
3. Start ironing
The buttons of a steam iron are roughly the same as those of a temperature-regulated electric iron, except that a “steam” clothing logo is added. . The temperature indicated by the “steam” clothing logo is the position between the wool and the cotton cloth, and the indicator light turns on immediately. When the indicator light goes out, it means that the temperature has reached the set temperature. If the iron has been filled with water, push the steam button forward slightly to reset the steam button, and the steam will be continuously sprayed from the small hole of the soleplate, and then ironing can be done. This is steam ironing! When ironing a few times; turn off the steam button and lock it back, and the air holes under the soleplate will stop spraying steam.
4. After ironing
After ironing, turn off the steam button and drain the remaining water. Then adjust the temperature knob to high-grade and turn it on to heat, turn off the power after all the internal moisture has evaporated, and then adjust the temperature knob to the lowest gear, let it cool, wrap it up and put it in a dry place. After using the steam iron for a period of time, if white powder appears in the air jet hole under the soleplate, you can use white vinegar and water to pour half and half into the water tank of the iron, heat it for about ten minutes, shake the iron, clean all parts, and then pour out the water and vinegar solution. , and then wash it several times with clean water next time and iron it again.
