What are the classification models of commonly used fishing
lines
1. Nylon thread: (traditional thread, four-color thread) The manufacturing process of nylon thread is generally made of resin It is made of silk (traditional thread) and other materials such as color (four-color thread) are added to the finished product, which is characterized by better ductility and elasticity.
2. Carbon plastic wire: carbon is added in the manufacturing process to make it more wear-resistant, but its malleability is poor. Yuji fishing (wear-resistant), and its specific gravity is relatively heavy, so it is also accepted by pond fishing, and its texture is relatively hard, and it is used for boat fishing.
3. Steel wire : Generally woven from multiple strands, single strands are harder in texture and easy to break when damaged, and multi-strands are softer, suitable for general fishing to prevent bites.
4. Braided wire (wiring, live wire, fusion wire)
Wiring: It is made of multiple strands and has better tensile force, but the initial wiring is not covered The film is easy to absorb water and is not easy to maintain, but its wear resistance and high tensile strength are relatively good, and it is widely accepted by boat anglers, but its water cut is poor.
Fire Wire: It is a multi-strand braided wire. During the manufacturing process, a film is added to each thin wire to prevent water absorption and has good water cut, but the damaged part is easy to form a hair ball, which is easier Broken, hard texture.
Fusion wire: Add a film to the braided wiring, and add multiple strands of nylon wire during the spinning process, the purpose is to obtain the high tensile value and wear resistance of the wiring, which is affected by the addition of nylon wire , This line is softer than general wiring and has good recovery.
5. Synthetic thread: (submerged thread, floating thread, middle-pass rod thread) In the manufacturing process of nylon thread, other materials are added to the finished product, such as floating materials (floating thread), suitable for Rock fishing, submerged materials (submerged line) are suitable for pond fishing, oily substances (line for Zhongtong rod) and resin processing to add tensile materials (casting line), etc.
How to choose the right fishing line
Check the line
When you get the fishing line , first look at the packaging instructions and whether the data indicators meet the standards. Then open the outer packaging for visual inspection. No matter what color of fishing line, the surface of the line must be shiny (except braided line), the transparent line must not have color, and the colored line must not be white. If the color appears in the fishing line (except for the color during production), there must be a problem with the quality of the fishing line. In addition, find one end of the standard fishing line and compare it with the fishing line you want to buy to see if the number of the line diameter is the same or close, the difference is not big, or the same line diameter, then the fishing line is acceptable, if the difference is very large, That is definitely not a good fishing line, because some inferior lines can only maintain a certain tension by increasing the diameter of the line.
Feeling the line
When purchasing a fishing line, first pull out a section of the line, and gently stroke it with your fingers to check by hand feel, the quality of the fishing line. Whether the thickness is uniform and the surface is flat. Then you can put the fishing line into the palm of your hand, squeeze it a little later, and then release the palm to check how the fishing line recovers after being stressed. If it recovers quickly in a short time, it is a good quality fishing line. Very slow or can not restore the original line, it must be a poor quality line. In addition, a good fishing line should be very soft, especially if the soft line is used as a sub-line, there are many benefits. When the diameter of the fishing line is the same, the softer the better.
Try it
Trying out the line is one of the most effective ways to identify when fishing. In fishing, after the fishing line is soaked in water, you can test how absorbent it is. The surface of the fishing line is rough in workmanship, the density of the materials used for making the line is not enough, and the waterproof protective layer is not effective. During the use process, the fishing line will absorb water. Once the fishing line absorbs water, the sensitivity of the line group will decrease, which will affect the normal transmission of fish floods. , a good fishing line should not absorb water. Whether it is wear-resistant is also one of the criteria for measuring the quality of fishing lines.
Commonly used fishing line types are:
0.4 (line diameter 0.104 mm),
0.6 (0.128 mm) ,
No. 0.8 (0.148 mm),
No. 1 (0.165 mm),
No. 1.2 (0.185 mm),
Size 1.5 (0.205mm),
Size 2 (0.235mm),
Size 2.5 (0.260mm),
Size 3 (0.285mm),
Size 3.5 (0.310mm),
Size 4 (0.330mm),
Size 5 (0.370mm)…
Normal The white or smoke gray is close to the water color, and its concealment is better.