1. How to install the fishing line on the sea fishing rod
The sea fishing rod is a kind of fishing rod, also known as the throwing rod and the throwing rod. It can be used for both freshwater fishing and sea fishing. . The sea fishing rod needs to be equipped with a reel, which can only be used after it is fully wound. The installation method of the sea fishing rod is as follows:
1. First, fold one end of the prepared fishing line in half.
2. Then fold the end of the folded fishing line back to form a loop.
3. Thread one end of the fishing line into the coil, so that the two fishing lines that were folded in half for the first time are wrapped around, then repeat step 2, and wrap 3-4 circles.
4. After the winding is completed, tighten the ends of the knot and subtract the excess thread.
5. Then open the cup holder of the fishing reel
, and tie a looper to the cup.
6. Finally, tighten the fishing line and let the looper tighten tightly on the line cup.
Second, What are the differences between a sea fishing rod and a lure rod?
The lure rod is a fishing rod used to cast various artificial lures. There are two types of straight handle and gun handle. The sea fishing rod is equipped with a reel at the end of the rod, and the reel is wrapped with a long fishing line, which can throw the hook to a farther water area, so it is also called a throwing rod. The difference between the two is mainly reflected in the structure, material, etc.:
1. Structure: each section of the lure rod is equipped with 1-4 wire loops of varying numbers, and each section of the sea rod is Only 1 wire loop.
2. Material: Lure rods mostly use carbon materials, while sea fishing rods are more commonly made of fiberglass materials.
3. Price: Lure rods of the same specification are generally more expensive than sea fishing rods.
4. Function: The lure rod has a wider application range than the sea fishing rod. It can not only catch big fish from a long distance, but also catch small fish close by; while the sea fishing rod is more suitable for long-distance fishing. big fish.
5. Appearance: The lure rod is thinner and lighter than the sea fishing rod.
6. Usage: The lure rod is generally used for hand-held fishing, while the sea fishing rod is generally fixed on the rod holder.
Third, it is good to buy a few meters of sea fishing rods
The lengths of sea fishing rods are generally 1.8 meters, 2.1 meters, 2.4 meters, 2.7 meters, 3 meters, 3.6 meters and other specifications, of which the sea fishing rods below 2.7 meters are called short rods and small rods, and those above 2.7 meters are called long rods and large rods. The length of the sea fishing rod should be selected according to the fishing ground and the target fish. to decide.
The length of the sea fishing rod has its own advantages and disadvantages. The short rod is less restricted by the fishing position, but it is not conducive to long-distance fishing; although the long rod is not suitable for fishing in fish ponds, river banks, woods and other areas, it is beneficial to Slipping and long shots. Therefore, if you are fishing in fish ponds, creeks and other fishing grounds that do not require long-distance casting, and the fish you catch are relatively small, it is recommended to use a short rod; if it is sea fishing or rock fishing, the fish may be large, which is more suitable. Use a long pole over 2.7 meters.