Water dispenserWhat to do with water leakage
Internal: including aging and rupture of internal silicone tube, aging of cold/hot tank welds, leakage of ice gallbladder, Internal overflow caused by leakage of pipeline machine (solenoid valve), water bottle and other components.
Resolution: Replace the part.
Top: If the top leaks, it is usually caused by a broken part of the water bottle. The other is that there is a problem with the floating ball of the clean water bucket and it cannot be sealed, but this usually does not happen.
Solution: Use is to check whether the water bottle is broken.
Faucet: Most of the reasons are that the head end cover is loose, the internal silicone sleeve is broken, or there are impurities and scaling inside.
Solution: Tighten the head cover and clean the impurities. If none of the above work, then only the faucet can be replaced. [Type of water dispenser>>]
What is the reason for the water dispenser leaking
Reason 1: The reason for the water dispenser leaking may be the water leaking water bottle The phenomenon.
Solution: First wrap the water bottle with a towel. If there is a horizontal leak, the towel will be wetted. At this time, we can prove that the cause of the water dispenser is leaking from the water bottle, or it is Replace the water bottle with a new one, and observe that the water dispenser does not leak again. After replacing the water bottle, the water dispenser no longer leaks, which can also indicate that the water dispenser leaks because the water bottle is broken. At this time, the drinking water bottle should be replaced.
Reason 2: Sometimes we do not turn off the faucet properly after receiving the water, which will also cause the Angel water dispenser to leak.
Solution: Re-tighten the faucet of the water dispenser to ensure that the faucet no longer leaks.
Reason 3: The one-way valve of the water dispenser is aging or the hoses at both ends fall off, which will also cause the Angel water dispenser to leak.
Solution: Use nylon fasteners to fasten the one-way valve or replace the one-way valve with a new one to solve the problem of water leakage from the water dispenser.
Reason 4: The smart seat of the water dispenser leaks water usually because the water bottle is broken and the water overflows.
Solution: Replace the water bottle with a new one. If the floating ball in the clean water bucket fails and cannot be sealed, replace it with a new one.
Reason 5: When the water dispenser leaks, it is because the internal components of the water dispenser leak, such as cold tank weld leakage, electronic ice gall leakage, water bottle rupture, etc., which will cause the water dispenser to leak.
Solution: Check the internal components of the water dispenser to see which part is leaking, and solve the problem of water leakage from the water dispenser by replacing the corresponding parts.
What should I do if the water dispenser leaks?
The water dispenser leaks, not from the faucet, but from the inside of the fuselage, and the side of the fuselage feels very hot to the touch, such a water leak occurs, the water dispenser leaks nothing more than There are almost two reasons: one is the leakage of internal components of the body, such as the rupture of the silicone tube, the leakage of the welding seam of the hot tank or the cold tank, the leakage of the electronic ice gallbladder, the leakage of the solenoid valve (pipeline machine), and the internal overflow caused by the rupture of the water bottle, etc. These usually require the replacement of damaged parts, or the use of a well-qualified water bottle; the second is that the top leaks, that is, the smart seat leaks, or it may also be caused by the failure of the floating ball and the inability to seal when using the clean water bucket.
1. If you are using bottled water, it is estimated that it is caused by air leakage in the bucket. The leak point is between the bucket mouth and the bottle cap. All bottled water is refilled. During the filling process, the barrel mouth will be worn to a certain extent. It will affect the sealing degree of the bottle cap and the barrel mouth. So it is recommended that you change a bucket of water.
2. If it is not a bucket, you can only replace the smart seat. The air intake you mentioned is a mesh on the upper end of the smart seat. The air first enters the water distribution pool from the mesh, and then enters the water bucket from the smart column. The water and air in the water bucket exchange positions and flow into the Huayu water dispenser.
3. The small round hole is for venting. If the heating gallbladder is not vented, it will explode. If it does not boil water and does not leak, replace the heating thermostat. If it leaks without boiling water, it means that the one-way valve at the bottom of the water filter is broken, just replace it.
4. It is estimated that the float is broken, and a new float will be fine. [Water dispenser cleaning method>>]
Declare: The above methods are derived from the program system index or shared by netizens, and are only for your reference and use, and do not represent the research views of this website. , please pay attention to the authenticity and authority of the content source.
