1. What is a floor heating water divider
The floor heating water divider is composed of two parts: water separation and water collection, which are collectively referred to as floor heating water dividers. The water distributor is a water distribution device used to connect various heating pipes and water supply pipes in the water system. The water collector is a water collecting device used to connect the return pipes of various heating pipes in the water system. The main accessories of the floor heating water divider are water divider, water collector, inner section head, filter, lock valve, joint head, valve, exhaust valve, heat energy meter.
Second, the working principle of the floor heating water separator
The floor heating water separator is the control center of the entire floor heating system. It is equivalent to the heart of floor heating and has a shunt. The function of partial pressure, when the heat medium flows into the room, it enters the main bar of the floor heating water separator after passing through the multi-function filter. In this link, the filter filters out the impurities in the heat medium to prevent the impurities from entering the underground pipe network and blocking the pipeline. The main bar is installed horizontally, so that the heat medium is evenly distributed to the floor heating branch pipes by using the principle of the same height and equal pressure. After the heat exchange system, each branch pipe flows back to the main bar of the water collector, and then flows into the water return port. in the heating system. In addition, a floor heating water mixing device is added to the heating system, that is to say, after the heat exchange, the temperature of the heat medium (water) is still very high. while saving energy.
Three, the role of the floor heating water separator
1. Adjust the temperature
Floor heating water separation If the water flow is large and the circulation is fast, the indoor temperature will be high; if the valve of each channel is half-open, or a single half-open, the amount of hot water in the pipeline will be reduced, the water circulation will be slower, and the corresponding indoor temperature will be high. The temperature is low; if the hot water is completely turned off, it will not circulate, which means that there is no heating in the room, so the indoor temperature can be adjusted by making good use of the floor heating water divider.
Tips: If you want to accurately control the room temperature, it is best to install a special floor heating thermostat.
2. Sub-room heating
When the floor heating system is designed and installed for large units, water pipes and return pipes will be installed in different areas, and each water pipe corresponds to one channel. Water divider, when there is no one in an area for a long time, the user can choose to turn off the water divider to achieve the purpose of room heating.
3. Diversion and voltage regulation
The water divider can divide the water in the water pipe, so that each water pipe can achieve the effect of pressure balance. There are corresponding valves for the inlet and outlet water, which can adjust the size of the water flow and achieve the balance of the water flow.
