What is the installation method of the garment steamer
1. Open the packing box of the garment steamer, take out all the parts, check the main unit and accessories according to the manual Complete, check for damage. If damaged, it should be returned in time.
2. Press the lock buttons on both sides of the steamer, find the aluminum alloy telescopic rod (folding rod), open the locks of the two aluminum alloy telescopic rods, stretch it, and insert it to the end box slot. If the position is correct, you will hear a click and not easily shake.
3. Put the iron hook into the aluminum alloy main rod from top to bottom, choose a suitable position according to the height, close the lock to fix it, and place the iron.
4. Insert the two steel pipes into the ironing board first, and then combine the two ironing boards. After merging, turn the nut on one side of the ironing board fixing rod counterclockwise, and match the position of the small hole at the bottom of the ironing board with the small hole in the middle of the aluminum alloy telescopic rod. Use the fixing rod to connect the corresponding small holes, and tighten the nut after completion.
5. Open the lock of the ironing board support. Note that at this time, insert the end with the lock into the piston below the bottom of the ironing board, and insert the end without the lock into the upper piston. Then turn on the rotary switch above, lay the ironing board flat, and put on the ironing board cloth cover.
6. Finally, install the clothes hanger, and use the two raised places to align the tops of the two aluminum alloy main rods respectively. Then check each assembly part of the machine switch, whether the lock is in the closed state, tighten the strength of the nut, and complete the installation.
The composition of the garment steamer
1. Inner core
The inner core refers to the heat According to the different heater materials, there are mainly aluminum alloy heaters, all copper heaters, copper plastic heaters, and zinc alloy heaters. The aluminum alloy heater has no cracks in one-time molding, small thermal efficiency loss, good energy storage effect, fast heat conduction, uniform steam, simple process and low production cost. It is not easy to accumulate scale and has a relatively long service life. The advantages of the all-copper heater are fast heating, large and uniform mist output. Long service life, can reach more than 8 years. The surface is not easy to scale, saving the trouble of regular cleaning. The disadvantage is that the processing technology is complex, the cost is high, and the price is high. The advantages of copper plastic heaters and zinc alloy heaters are low cost and low price. The disadvantages are short service life, slow heat conduction, and uneven steaming.
2. Steam conduit
There are mainly two types of steam conduits: fiber braided hose and corrugated hose. The fiber braided hose has the advantages of anti-scalding, high temperature resistance and uniform steam. Generally, the fiber braided hose is selected for the garment steamer with small steam pressure. The corrugated hose (with silicone tube inside) has the advantages of high temperature resistance, acid and alkali resistance, etc. Generally, the corrugated hose is selected for the steamer with high steam pressure.
3. Brackets
Brackets are divided into bimetallic poles, single metal poles, and non-retractable brackets. The bimetal rod has the advantages of convenient storage, strong three-dimensional effect, good stability, and no need for a hanger. The disadvantage is that the cost is high. The single metal rod has the advantages of convenient storage and small size. The disadvantage is poor stability and the need for additional hangers. The non-retractable bracket has the advantage of being cheap, but it has disadvantages such as cumbersome assembly and difficult height adjustment.
4. Support plate
The support plate can integrate the ironing board of the traditional electric iron on the whole machine in a certain way, Provides a support for the garment steamer to provide better ironing results, called a garment steamer with a support plate.
5. Other accessories
The main accessories of the garment ironer are trousers clips, ironing brushes, dusting brushes, etc. The optional accessories of the garment steamer mainly include storage accessory bag, anti-scalding gloves, water refilling cup, descaling agent, water softening device to prevent the formation of scale, etc.
Declare: The above methods are derived from the program system index or shared by netizens. They are for your reference only and do not represent the research views of this website. sex and authority.
