1. What are the raw materials of machine-made charcoal?
Machine-made charcoal, also known as machine-made charcoal, artificial charcoal, regenerated charcoal, smokeless clean charcoal, is a kind of wood scrap The extruded carbon rods are internationally recognized as green products. The density of machine-made charcoal is similar to that of coal, which is more than 3 times that of ordinary charcoal, and it is smokeless when burned.
The raw materials of mechanism charcoal come from a wide range of sources, such as rice husks, peanut husks, cotton husks, corn cob, corn stalks, sorghum stalks, bean stalks, sawdust, wood chips, wood shavings, pine shells, and coconut shells. To produce machine-made charcoal, sawdust, shavings, bamboo chips and rice husks are relatively good raw materials for production.
Second, how to quickly ignite mechanism charcoal
It takes a certain amount of time to ignite mechanism charcoal. If you master the correct method, you can shorten the time. The ignition methods are as follows:
1. Solid fuel block ignition
Although liquid alcohol and gasoline are quick to ignite, they are not safe, and the cost is also relatively high High, and solid fuel blocks are much more convenient. Generally, you can buy them from outdoor equipment stores, barbecue shops or wholesale markets that sell machine-made charcoal, or you can buy them online. When starting a fire with solid fuel blocks, you should pay attention to ventilation, first smash some small pieces of machine-made charcoal out, and then you can find some small wooden sticks and put them on a shelf, put the machine-made charcoal on it, and fan the air after the wood blocks are completely burned.
2. Charcoal for ignition
Charcoal for ignition is specially used for ignition and is particularly easy to burn, but the disadvantage is that it is bulky, easy to get dirty, and the price Not cheap and not very practical.
3. Wood blocks to set fires
Find some pine wood blocks and bamboo sticks at random, cut them into small pieces and stack them up, leaving a small gap, and then Just light the wood block below and put a few pieces of machine charcoal on it. It should be noted that synthetic materials such as plywood should not be used to avoid hazards caused by the release of chemical substances.
4. Charcoal Stove
It is a stove specially used for ignition of machine-made charcoal and round charcoal. The internal air is not circulated, so the charcoal does not burn, which can save carbon sources.
Reminder: Don’t forget to prepare a bucket of water or put a fire extinguisher aside to avoid accidents.
3. Which is better, mechanism charcoal or fruit charcoal
1. Fruit charcoal
Fruit charcoal It is log charcoal, that is, the fuel that has been added after burning, distillation and other processes after logging. Common fruit charcoal on the market includes apple wood, lychee wood, etc. The roasted taste is very fragrant.
2. Mechanism charcoal
Mechanism charcoal is charcoal produced by charcoal machine. And it belongs to waste utilization. Therefore, compared with fruit charcoal, machine-made charcoal is higher temperature, flame-resistant and environmentally friendly. However, machine-made charcoal also has disadvantages, that is, high ignition point, difficult to ignite, and easy to catch fire.
Generally speaking, these two kinds of charcoal have their own advantages and disadvantages. When grilling, you can choose according to the grilling material: if you are grilling vegetables and need to brush more oil, then I suggest you use fruit charcoal, because the temperature of fruit charcoal is lower, and the oil droplets are not easy to catch fire; if you are roasting larger things, such as roasting whole lamb, it is recommended to use machine-made charcoal, because the machine-made charcoal has high temperature resistance and high efficiency. higher.
