1. What is the reason why the atomizer does not fog?
There may be the following reasons:
1. There is dust in the atomizer .
2. The atomizing cylinder is faulty.
3. Another situation is that there is a layer of green-black electrolyte on the electrode, which makes the contact resistance between the electrode and the transducer chip very large, which hinders the high-frequency electric energy. transmission.
4. Others.
Second, what should I do if the atomizer is out of fog
1. Press the switch key, the atomizer does not work.
The first step is to check that the power is on.
If there is no problem with the power supply, it will be more troublesome and further maintenance is required. It is recommended to contact the merchant for after-sales. If it is a professional, you can open the machine for inspection and troubleshooting.
2. Press the switch key, the machine runs without fog or very little fog.
First unplug the air duct, and feel the air outlet to see if there is airflow, or the airflow is small.
If it is, it may be that the air inlet or air outlet is blocked. If it is found to be blocked after inspection, it can be cleaned up. This kind of air hole blockage is often caused by the filter cotton of the air inlet hole being used for too long, and the dust Caused by too many layers.
If it is not that the air hole is blocked, it may be a problem with the compression pump of the atomizer. It is recommended to contact the after-sales service. If the air outlet is normal, check whether there are water droplets in the airway and whether the atomizing cup is installed correctly. , Whether the airway and atomizing cup are broken or not connected properly.
3. After the atomizer is turned on, the fog is normal, but the noise is louder than usual, and the vibration is aggravated.
Shut down the machine first and give it a full inspection. You can shake the machine lightly to see if there is looseness inside the machine. If so, it is recommended to deal with it after sale. If there is no problem, check whether the air inlet is filled with filter cotton, whether the machine is placed smoothly, and the atomizer is damped. The foot pads are normal, etc.
