1. What to do if the GPS
tracker is removed by the thief
The GPS tracker is removed by the thief: it can be set by GPS If there is a mobile alarm, it will automatically send a message to your mobile phone, and directly call the police after receiving the message. Of course, our most important thing is to prevent the car GPS tracker from being removed by thieves.
GPS locator has been widely used and is very common. important role. GPS trackers are very advanced risk control equipment in some industries, but in certain industries, there is no secret at all, and it is inevitable to be removed, so how to prevent GPS trackers from being removed is a problem that practitioners in specific industries have to consider. .
So how exactly do you prevent the GPS tracker from being removed? What are the effective ways to prevent the GPS locator from being removed?
1. The anti-dismantling GPS locator can be selected, which will increase the difficulty of dismantling when the equipment is damaged.
2. Use a GPS locator with a backup power supply. When the external power supply is damaged, it can still locate for a short time and issue an alarm message.
3. The installation should be as concealed as possible. Install the device in a place on the vehicle where it cannot be easily found.
4. After dismantling, the track playback function can be used to find out the movement patterns of people or vehicles.
5. When conditions permit, two GPS locators can be installed, and thieves will take it lightly after dismantling one, and often will not look for the other.
2. What should I do if the gps locator fails
(1) The phone has just been charged, but it still shows offline why?
Answer: 1. After re-payment, the operator will re-enable the GPRS function of your SIM card within 24 hours, please confirm whether the GPRS has been restored;
2. After confirming that GPRS has been activated, please restart the phone.
(2) Why is the newly installed device displayed in the field?
Answer: 1. If the vehicle is installed and displayed on the platform in a ‘stationary’ state, but it is also displayed elsewhere on the map. This is because after the device is installed, the vehicle has been in a stationary state. When the device is stationary, it will not transmit GPS data to the server (consider data saving). This phenomenon is because the device has not transmitted the latest positioning data to the server, and the old positioning data is still displayed. So you still see the old location data.
Solution: Please drive the vehicle to an open area for a distance. When the vehicle is in motion, the latest positioning data will be uploaded to the server, so that you can see the exact location. .
2. If the vehicle displays ‘offline’ or ‘not online’ status on the platform after it is installed. This is because the device has not been connected to the server, the GPS positioning data has not been uploaded to the server, and the old positioning data is seen.
(3) What is the reason that the base station (LBS) positioning always drifts to a fixed place and the distance is too large?
Answer: Base station positioning depends on whether the synchronization between the base station and Google Maps is consistent. Some new base stations or moved base stations will drift if they are not updated in time in Google. Wait for Google to update regularly
(4) Why does the data in the running statistics not match the actual situation? Mileage statistics do not match actual mileage?
A: The operation statistics function on the monitoring platform is based on the location information uploaded to the monitoring platform by the locator, and the statistics are carried out. The location information of the locator may be restricted by factors such as signal, environment, fault, etc.
In other words, if the locator is offline or not positioned, and there is no accurate position data, there may be some errors in the data of running statistics. Therefore, the operating statistics on the monitoring platform can only be used as a reference.
(5) Why does the vehicle still start after the fuel and power are disconnected remotely?
Answer: After the oil and power are disconnected remotely, the positioner will cut off the oil and power only when the following conditions are met:
1 The wiring of the GPS locator is correct, and the wiring is according to the wiring diagram of the manual.
2. The locator is working normally, in the ‘stationary’ or ‘driving’ state, and the vehicle speed is lower than 20 kilometers per hour.
If the locator is offline, not positioned or the vehicle speed is higher than 20 kilometers per hour, the locator will not cut off the fuel and electricity even if the remote fuel and power cut off is successful.
Declare: The above methods are derived from the program system index or shared by netizens. They are for your reference only and do not represent the research views of this website. sex and authority.