What should I do if the washing machine cannot spin? 1. The laundry is in an unbalanced state during washing
When the laundry cannot be adjusted to a balance when there are too many laundry, the washing machine will automatically adjust to low The rotation speed will cause the dehydration effect to be poor. If this is the reason why the washing machine cannot be dehydrated, then there is no need to worry too much: you can put a smaller number of clothes before washing the clothes. unbalanced. And the effect of dehydration is not good.
2. The safety switch of the top cover of the washing machine is damaged
The washing machine is a high-speed mechanical movement in the process of dehydration. Try not to open the top cover during the dehydration process to avoid damage to the top linkage switch. If the top cover linkage switch of the washing machine is damaged, the washing machine cannot perform dehydration. Reminder: To avoid causing the washing machine not to be dehydrated, do not open the top cover during the dehydration process of the washing machine.
3. The texture of the clothes causes
Compared with summer, there are many types of clothes in winter. For example, the clothes of woolen type have strong water absorption. If you choose low-speed dehydration, it will cause the illusion that the washing machine cannot dehydrate. , so it is recommended to use high-speed dehydration for laundry with strong water absorption (ps: high-speed dehydration cannot be used for high-end clothes).
4. The washing machine drainage system is blocked
When the washing machine drainage system is blocked, the washing liquid in the water tank cannot be discharged. The water level switch cannot be reset, and the washing machine cannot enter the spin cycle. If it is the reason that the washing machine cannot be dehydrated, it is suggested: remove the drain filter for cleaning, rinse the drain outlet with water and remove the debris in the drain valve.
5. The water level switch cannot be reset
The dehydration program of the washing machine starts under the condition that the water level switch is reset after the washing liquid is drained. If the drain water level switch is damaged, dehydration is a procedure that needs to be performed after draining. If the water level switch is damaged, the dehydration program cannot be entered! Solution: Contact the after-sales point.
Combining the above 5 reasons why the washing machine cannot dehydrate, we find that the reason why the washing machine cannot dehydrate is not all machine faults, but may also be the illusion that the washing machine cannot dehydrate due to improper human operation.
The reason why the washing machine does not spin due to its own failure 1. The washing machine does not spin due to motor failure
If the washing machine fails to spin due to the failure of the washing machine, you can try to open the back cover of the washing machine and move it by hand Pulley, if there is no sticking phenomenon. After the power is turned on, if the motor has a humming sound and does not rotate, the motor is short-circuited or damaged between turns, or the capacitor is not connected to the motor circuit. At this point, the power should be cut off, and the motor belt should be removed to restart. If the motor still does not turn or the speed is low, the motor is faulty and the motor should be repaired or replaced.
2. Dehydration cannot be done due to damage to the solenoid valve
The washing and dehydration of the fully automatic washing machine is accomplished by switching the gear at the bottom of the solenoid valve, and the damage to the solenoid valve will also make the dehydration unable to operate normally!
3. Loosening of the motor plug
Since the connection wires of the drum washing machine are all connectors, during transportation, due to vibration and other reasons, the motor plug is often loosened or the insert is pushed out during installation. If the plug is loose, it should be re-inserted and tied with a tie wire to prevent it from falling off again.
4. If the computer control board is faulty, it can only be replaced. Because the control board is covered with glue for waterproofing, it is very inconvenient to repair!
5. The motor thermal protector operates
due to Overload, locked rotor and other reasons cause the motor to heat up, and the motor thermal protector will not dehydrate the washing machine. At this time, it can be used as long as the thermal protector is reset.
6. Some models are equipped with a non-drying button, and the washing machine does not dehydrate.
First, check whether the non-drying button is pressed. If this button is pressed, the washing machine has an anti-wrinkle function and does not dehydrate the laundry. As long as the non-spin button is lifted, the washing machine can spin.
The washing machine does not feed water or drain, what should I do? 1. No water intake
Check whether the filter screen of the water inlet valve is blocked and whether the water inlet valve is damaged? After confirming that the two are in good condition, measure the voltage of 220V at both ends of the solenoid valve with the AC voltage block of a multimeter, which proves that the fault lies in the solenoid valve itself.
Use the electrical barrier to measure the resistance of the solenoid valve coil. The normal value should be 4.5~5.1kΩ. The measured resistance value is infinite, indicating that the solenoid inlet valve coil is burned out. Replace the inlet valve and troubleshoot.
2. Continuous water intake
The water intake of the washing machine has reached the rated water level, and the water intake solenoid valve still does not stop the water intake. In this case, the water level pressure switch is generally damaged, which can be judged by the blowing and pressurizing method. Disconnect the power supply; remove the water level switch, blow air to the pressure switch through the air return pipe, and use a multimeter to measure the resistance between the two terminals of the water level switch.
After inspection, the measured resistance value of this machine is always high and the action sound of the contacts in the water level switch cannot be heard, which indicates that the water level pressure switch is faulty. After replacing the water level pressure switch, the fault is eliminated.
3. No drainage
The fault location of the ineffective drainage: the drain valve is blocked; the electromagnet coil is open; the program controller has no signal output.
Why does the washing machine vibrate when spinning?
Answer: The high-speed rotation of the dehydration tub will generate certain vibrations when the washing machine is dehydrating. But how to vibrate too vigorously is not normal. In this case, first turn the timer to “0” and stop the rotation of the dehydration bucket. After waiting for the dehydration bucket to stop, you can pay attention to whether the abnormal violent vibration is caused by the imbalance of the clothes inside. Put the heavy clothes on the bottom, balance the clothes, and then turn them on again. If the violent vibration disappears, it proves that the clothes are not placed in balance.
One of the easiest reasons for a drum to vibrate is an unbalanced arrangement of clothes. In addition, if the vibration continues to occur, and it is judged that the non-clothing is not balanced, then we need to check the cause of the machine itself:
1. It may be the coupling and the dehydration barrel shaft Or the fixed top wire of the motor shaft is loose, and the top wire needs to be fixed;
2. It may be that the dehydration bucket skews the coupling, the straightness and concentricity are not good, and it tilts to one side to cause jitter;
p>
3. It is possible that the three anti-vibration springs of the motor are not of equal height, or that a certain spring is elastically invalid or even damaged, causing jittering. Stop the machine to adjust or replace the spring.
Solve 3 common problems of front-loading washing machines
1. Is the kilogram marked on the washing machine the weight of dry clothes or wet clothes?
The kilograms marked on the front panel of the washing machine refer to the dry weight. Under the standard program, the load-bearing capacity is tested for pure cotton dry clothes. (Note: The amount of water absorbed by different fabrics will be different. For the weight of the clothes that can be washed in each program, please refer to the program table in the manual.)
2. The drum washing machine is noisy during dehydration. Is it normal to have a squealing sound?
Reason analysis: The drum washing machine adopts a high-speed design. During dehydration, the inner cylinder hole is in contact with the air at high speed, resulting in a slight airflow vibration sound (similar to a scream), which is a normal phenomenon and is unavoidable. The faster the speed, the more obvious the sound is, so you can use it with confidence.
3. How to clean the door seal of the front-loading washing machine?
Open the roller door first.
Then remove the door seal and wipe the residual dirt with a cloth along the door seal (you can also use chopsticks to wrap the cloth), and put some neutral detergent on the cloth to make the door clean. Seals are cleaner.
After wiping, open the door for about half an hour for ventilation, and close the door after the door seal is dry.
Tips: It is recommended to use low-foaming detergent. After each laundry, wipe the residual water and dirt on the door seal with a dry cloth, and close the door after opening the door for about half an hour to prevent the growth of bacteria.
