How to repair the wireless barcode scanner
Question 1 : The wireless scanner scans normally, but the base data output is inaccurate
Analyze the reason:
1. It may be that the cable interface is loose ;
2. The keyboard input mode setting on the scanner is incorrect;
3. The wireless communication setting is incorrect.
Solution:
1. If the interface is loose, you need to disconnect the cable and reconnect;
2. The keyboard input method is not Correct, correct the setting to allow English letter input;
3. Correct the wireless communication setting.
Question 2: The wireless scanner does not scan normally
Analyze the reason:
1. The scanner may not be powered on;
2. The cable used does not match the scanner;
3. The cable interface is loose.
Solution:
1. Check the power supply of the scanner and reconnect it;
2. Use the original cable Or connect to the cable of the scanner model;
3. Disconnect the interface and reconnect it.
Question 3: The wireless scanner cannot decode some barcodes
Analysis of the reasons:
1. The distance between the reader and the barcode is not suitable;
2. The barcode is defective.
Solution:
1. Move the wireless scanner closer to or away from the barcode;
2. Use other similar Scan the barcode to see if it can be read. If it doesn’t work, it is a problem with the scanner gun, please contact the supplier to help you.
