1. How to adjust the bicycle computer
Usually, the upper right of the bicycle computer is the RESET (reset) button, referred to as the reset button, and the upper left of the table is the SET (setting) button key, referred to as the setting key; the bottom of the table is the MODE (mode) key, referred to as the A key. Each time the mode button is pressed, it changes the display content of the computer (time, distance, etc.), the set button is pressed during adjustment, and the reset button can be pressed for a long time to clear the data. The adjustment of the bicycle computer is very simple. almost.
II. Cycling computer setting manual
This picture is by registered user’ Provided by ‘Warm Living Home’, copyright notice feedback
Initial settings
Press the setting key first, then press and hold Press and hold the setting key for about 3 seconds, and the main setting menu will appear (set is displayed on the upper right of the screen). First press the mode key to switch to the function menu that needs to be changed, then press the setting key to enter the secondary menu, the place that can be changed will flash, then press the reset key to adjust the specific parameters, and then press the setting key after the adjustment is completed to confirm the change, After setting, the screen will display ‘SET OK’ prompt.
The reset key is to reset to zero; the set key is to confirm; the mode key and reset key are to adjust.
The contents
and main functions of each menu are as follows:
1. LANGUAGE (language setting): There are 7 languages to choose from, here we set ‘ENGLISH’.
2. KMH/MPH (speed unit): There are 2 speed units to choose from, here we set ‘KMH’.
3. WS BIKE1 (bicycle rim size): directly input the circumference of the rim. Method: diameter ?w 3.14 (meters).
4. CLOCK (clock setting): Set the current time.
5. TOTAL ODO (total cycling mileage): Set the initial value of the total cycling mileage. The unit of mileage is KM.
6. TOTAL TIME: Set the initial value of the total riding time.
7. CONTRAST (display contrast): There are 3 options, 1 (light), 2 (standard), and 3 (dark).
After all the above settings are completed, snap the stopwatch into the base and it can be used normally.
Use settings
Press the MODE key to switch:
1. TRIP DIST (single trip distance): Display the current riding distance. Long press the reset button to reset.
2. TRIP TIME (single trip time): Display the current riding time. Long press the reset button to reset.
3. AVG.SPEED (average speed): Displays the average speed of the ride. Long press the reset button to reset.
4. MAX.SPEED (maximum speed): Display the maximum speed of riding. Long press the reset button to reset.
5. CLOCK (clock): Display the current time.
6. TOTAL ODO (total riding mileage): Display the total riding mileage.
7. TOTAL TIME: Displays the total riding time.
Extended functions
Stopwatch function (STW), instant temperature display (TEMP), minimum temperature (MNTEMP), maximum temperature (MXTEMP), instant calories Consumption (CAL), Total Calorie Burn (KCAL), Fat Burn (FAT), Goal Distance Up (KM+), Ride Time Up (TIME+), Scan Mode On (SCAN Distance, Ride Time, Average Speed) ).
Tip: If all the extended functions are turned off, they will not be displayed in the main mode. Generally, the new computer is all turned off by default. If you need any functions, you can turn it on by yourself.
III. Steps of bicycle computer setting
Press the SET button + MODE button at the same time (long press for 3-5 seconds) to initialize the computer.
After initialization, first select the Chinese language, and press the MODE key to switch to ENGL (English) mode.
Press the SET button again, we will see the KM mode, which does not need to be adjusted under normal circumstances.
Press the SET key again to enter the wheel diameter setting mode, and press the MODE key to set the wheel diameter (the default setting is 2155MM).
Press the SET button again to enter the total mileage setting (generally, it is not necessary to set it when using it for the first time, when the computer data is lost, we can enter the total mileage setting).
Press the SET button again to enter the maintenance setting, we can set a certain driving distance to perform a maintenance on the car.
Press the SET button again to enter the shutdown mode. When the computer is not in use, it will enter this mode to shut down and save battery consumption.
Press SET again to set the weight in kilograms and pounds.
Press SET again to set your personal weight (default 65KG).
Press the SET key again to enter the time system setting (usually select 24-hour system).
Press SET again to enter the time setting.
Tip: For some bicycle computers, press any key to activate the full-screen backlight for 5 seconds, and press and hold the right button for 5 seconds to enter the extended function mode (EXPERT).
Single mileage reset setting: press MODE right button TAGKM or English TRIP French DIS file, then press SET left button for more than 3 seconds to reset.