Cleaning method of toaster
1. First, don’t rush to scrape with steel balls or hard objects, which will easily damage the collective and heating wire, resulting in excessive Stove can’t work, it’s forbidden.
2. A damp cloth is a more effective tool. Find a few damp cloths and wipe them directly with the damp cloth, which will ensure a good cleaning effect. However, at this time, you need to bake a few more slices of bread to absorb the moisture inside the toaster, and these slices of bread must not be eaten.
3. A small brush is also a good cleaning tool, but at this time, when the cleaning effect of a damp cloth is not ideal, you can use a small brush for further cleaning. However, what you need to pay attention to at this time is that you must not use too much force, and after cleaning, you need to wipe off the cleaning debris with a rag.
Cleaning steps of the toaster
1. Read the product manual in detail to understand the structure and maintenance of the toaster;
2. Separate the toaster from the power source and achieve electromechanical separation;
3. Pull out the toaster chip tray;
4. Put the separable accessories according to the
5. Prepare neutral detergent and a soft cloth;
6. Dilute the neutral detergent with a small amount of water;
7. Cast the soft cloth with detergent;
8. Use a damp and dry soft cloth to wipe the keys and knobs of the toaster clean;
9. Wipe
10. Wipe the crumb tray and other accessories clean;
11. Use detergent and a soft cloth to remove the oil fume from the outside of the toaster;
12. After confirming that the toaster is clean, use clean water and a soft cloth to remove the detergent;
13. Install the accessories of the toaster back to the original position;
14. Place the cleaned toaster in a cool, ventilated place to dry naturally.
How to maintain the toaster
1. Maintenance before use
When using the bread machine for the first time, the bread bucket must be Strictly follow the instructions in the instructions to apply oil and dry cooking, including the bread barrel shaft and the inside of the stirring knife (drip oil into it with a small spoon), then install the stirring knife, use the baking menu 11 to grill for 15 minutes, then stop the program, Open the lid to let the machine cool down, then take out the bread bucket and clean it before use; smoke and smell will be emitted during the first dry burning, customers don’t need to worry, because the inner cavity and heating tube of the machine are made of metal , In order to protect some materials, the manufacturer will give them lubricating oil protection when leaving the factory.
2. Maintenance after use
After making bread, take out the bread bucket and the mixing knife and clean it. If the mixing knife sticks to the barrel shaft, use warm water Soak for about 20 minutes, so that the mixing knife can be easily taken out. After cleaning with warm water, put a little cooking oil on the bread barrel shaft, so that the water will corrode between the barrel shaft and the hole, and then every time Apply cooking oil one more time before use, and fall down along the barrel shaft when pouring the oil. This can not only enhance the lubricity of the barrel shaft, but also prolong the life of the barrel and the stirring knife.
3. Motor maintenance
Small electrical appliances must be used well and must be used scientifically. Small household electrical appliances, especially electromechanical products, want to play their functions for a long time. It brings convenience to life, and it is necessary to use it according to the amount. When the motor has abnormal conditions such as heat, it must be stopped and cooled before use. Otherwise, its service life will be shortened, or the motor may be burned out. After the first time, you must wait until the machine is completely cooled before using it for the second time.
Declare: The above methods are derived from the program system index or shared by netizens. They are for your reference only and do not represent the research views of this website. sex and authority.
