Super-beautiful LED wall light creative DIY method teaches you to make creative wall light with IKEA Skula pots
Super-beautiful LED Creative DIY method of wall lamp
When I saw someone use IKEA Skula large candle lamp to DIY wall lamp, EILIER thought it was another two steps of “drilling – threading the lamp wire”, but I didn’t expect this Great idea! The light source used by Jen is an LED cabinet light with batteries, which means that the DIY of the light does not have to be drilled this time, which lowers the threshold for hand-made work (after all, many households are not equipped with a hand drill).
All we need are two Skull block candle lights (by the way, the Guangzhou mall is on sale until July 22, 39 yuan each) and 2 LED cabinet lights.
There are a few tips to be verbose:
Most cabinet lights are larger in diameter than the Scully The inner diameter of the base of the large candle light (11cm) is small, but please pay attention to the diameter of the LED cabinet light when purchasing. Stores that sell LED cabinet lights usually send 3M non-marking double-sided tape and batteries, so readers don’t have to prepare extra like Jen. LED cabinet lights are battery powered and come in yellow and white colors. Please choose according to the needs of the living environment. Yellow is generally recommended (though it can feel sleepy). There are two ways to turn on the light, touch and infrared induction.
Each has its own advantages and disadvantages:
(1) Touch type: put your hand into the Skula and touch the lamp The cover can turn the lights on and off. The advantage is that the light can continue to shine, but the disadvantage is that it is not suitable for temporary use in dark environments, such as night lights.
(2) Infrared induction: You can turn on the light by shaking your hand outside the Skula lampshade. The advantage is that it is convenient to turn on the light, but the disadvantage is that it will automatically turn off after 20 seconds (such as balcony lights).
Okay, assuming everyone has the materials ready, let’s get started.
The process is very simple:
(1) Install 3 batteries for the LED cabinet light.
(2) Stick the 3M round double-sided tape on the battery cover of the LED cabinet light. If the area of the double-sided tape exceeds the battery cover, the reader should cut off the excess! (3) Center the LED cabinet light on the bottom of the Skula.
(4) Hit a nail on the wall and hang the Skula on it.
The effect is beautiful! Although it is hollow, the density is just right, and the light passing through the gap will not be dazzling. The crochet and lace patterns unique to Skula are very homey. If the LED light is bright enough and the shade is in the right position with the wall (which can be obtained by adjusting it), the pattern will have a nice shadow on the wall.
In addition to using it as a wall lamp like Jen, the shredded meat can also find ways to realize ideas such as chandeliers, table lamps, floor lamps, etc. By analogy, if readers have bamboo baskets and baskets in their hands, they can also use them as lampshades.
